Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…
view full answer...In 2007, Chevrolet stopped offering plug-in connectors for brake controllers on their full size trucks with tow packages. Instead, you will have four or five blunt-cut wires bundled underneath your dash. The wire colors should be red with a black…
view full answer...The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...So "flipping the axles" is just another term for an over/under conversion kit, and so long as your 2019 Coleman Lantern LT 17FQ has round axles as opposed to torsion axles, this will be a smart thing to do in order to get more ground…
view full answer...The 175/80-13 tire that you have now is 24" diameter x 6.9" wide and the new 225/75-15 tire is 28.3" diameter x 8.9" wide. Therefore, the new tire size will be 4.3" larger in overall diameter and 2" larger in overall…
view full answer...I do have a solution for you but we do not have an axle that meets the measurements you have provided. What I recommend to replace the axle AND the suspension all at once is a Timbren Axle-Less system such as #A35RS545 or #A35RS545E. With this set up…
view full answer...There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…
view full answer...The location of the connector for connecting the Curt Wiring Adapter #C77BR on your 2023 Hyundai Santa Fe is under the dash to the left of the steering column. The 4-pin connector is cream colored and should be exposed. Be sure to look and feel…
view full answer...As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
view full answer...For a weight distribution system, there are always exceptions,but in general the systems with only bars and chains do not have sway control. They are adjustable in tension for different weight, but are a little more work. The bar systems whether…
view full answer...I have attached a diagram that shows how to wire a brake controller from scratch. If your truck did not come with a 7-way trailer connector, then you will also need to use the Installation Kit, #ETBC7. Your 1998 Chevrolet Pick up will not have a…
view full answer...Related Searches
Filter Your Search
Contact and Help