How To Find the Correct Replacement Screw For a Landing Gear Leg On a 5th Wheel Trailer

Updated 07/10/2019 | Published 07/09/2019

Products Featured in This Question

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

(47)

$262.96

Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"

(36)

$257.49

Question:

I am trying to find the replacement screw for my Dad’s 2003 Four Winds 5th wheel landing jacks. I found a kit like I need but the measurements are not correct.

asked by: Derrick H

Expert Reply:

I do have an option for you but in order to confirm the correct replacement landing gear leg screw for you, I would need to know the model number of the jack. If you can provide this for me then I can go about seeing if we have the correct landing gear leg screw for you. If you cannot locate any sort of model number then your best option would be to just replace the entire jack leg as this will only cost you sightly more and it will make things much easier in regards to both installation and availability.

In order to determine what the correct replacement landing gear leg is you will need to take two measurement, the distance between the two weld stops and the length of the outer tube. I have attached a photo of what they should be. If this is true then you can use part # LG-177202 for the lead leg and part # LG-177201 for the follow leg.

expert reply by: Conner L