What Vehicles Does Draw-Tite 75097 Trailer Hitch Fit

Question

Question:

What vehicle will the Drawtite 75097 hitch fit? I am looking for a hitch for a 2000 GMC Sierra 2500 pickup.

asked by: L.B. L

0

Expert Reply:

I reached out to my contact at Draw-Tite and the 75097 model hitch that you referenced is actually the older version of the Draw-Tite # 75362, which is a confirmed fit for your 2000 Sierra 2500 if it has the factory standard bumper.

If you need the installation hardware for your hitch you can use part # RHK. In the text box provided on the product page simply type in the model number (75097) and select "Draw-Tite" from the manufacturer drop-down menu. We will then send out the complete hardware kit for this particular hitch.

expert reply by: Chris R

0

Patrick

3/4/2024

Was wondering if the Draw tite 75097 would fit on my 2018 Chevrolet Silverado 1500??

Reply

Mike L.

3/5/2024

@Patrick The Draw-Tite # 75097 was discontinued about 20 years ago. It's been so long that we no longer have fit information for it. If you use the link we've provided, you can see the hitches we currently offer that would fit your 2018 Silverado 1500. Of those choices, I'd recommend the US-made etrailer brand Class IV hitch, part # e98860.

Helpful Links

hitch-2018_chevrolet_silverado+1500.htm

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The best option to replace your Dometic Brisk Air II 57915.751 air conditioner is from Advent Air, and you can choose from either White or Black in color: - White: Advent Air Replacement RV Air Conditioner for Dometic Setup #ACDOM150 - Black: Advent…

view full answer...

Answer 6

We don't specify between the 1500 and 1500 HD in terms of fit in our guide, but I did check with our manufacturers for you to verify the fits for a trailer hitch receiver on your 2003 Chevy Silverado 1500 HD. The correct fit is going to depend on…

view full answer...

Answer 7

If your truck has a standard or step bumper bumper the Draw-Tite Hitch, part #75362, will fit just fine. If the truck has a 10 inch Deep Drop bumper, you will need to use Curt Hitch part #13339. If you are not sure which bumper you have, I have added…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #13339 is 39-1/8" on center from the left frame mounting bolt holes to the right frame mounting bolt holes.

view full answer...

Answer 9

I spoke with my contact at Curt and the Class III Trailer Hitch Receiver, #13339, may work for you. Although this hitch is confirmed to fit a 2000 Chevrolet Silverado 2500 with a deep drop bumper, this has not been tested with the Knapheide utility…

view full answer...

Answer 10

All of the Class II ball mounts out there have a 3/4 inch diameter ball hole. It might be the best solution for you to replace the ball you have with one that will fit that ball hole size like what comes with the #36065 that you mentioned. For a 2…

view full answer...

Answer 11

When I looked up the online version of the owner's manual for your 2007 Chevy Silverado 1500 Crew Cab it looked like the least rated option was still 6,700 lbs and that is if you have the 3.23 axle ratio. If you look at the online owner's…

view full answer...

Answer 12

Yes, they do John. To add a hitch to your 2026 Kia Sportage hybrid, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It's going to give you…

view full answer...

What Vehicles Does Draw-Tite 75097 Trailer Hitch Fit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching