Will Crossbar for Roadmaster Falcon 5250 Tow Bar Fit New Falcon 2 Tow Bar

Question

Question:

Will a falcon 2 tow bar fit the base plate of a 5250?

asked by: Dale

0

Expert Reply:

I believe you are referring to the crossbar base for the older Roadmaster Falcon 5250 Tow Bar. If this is the case then yes, the same Replacement Crossbar # RM-067 is compatible with both the discontinued Falcon 5250 and the current Falcon 2 Tow Bar # RM-520.

expert reply by: Chris R

0

Answer 1

Yes, the Falcon 5250 tow bar is compatible with the Roadmaster Direct-Connect Base Plate Kit #RM-523196-5 for your 2020 Buick Envision. This particular tow bar has been discontinued for a while now so I would imagine that you'd need the Repair…

view full answer...

Answer 2

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Kevin, welcome back! You are correct, since you have ParkSense on your 2026 Rubicon the #RM-152 is not the correct wiring kit. What you need instead is the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights #RM47ZR. This will get…

view full answer...

Answer 6

Hi Arthur, I took a look at your list of parts to flat tow your 2026 Jeep Wrangler Rubicon and it looks like you have almost everything you need! For the Blue Ox Patriot Supplemental Braking System part #BLU37TR, it plugs directly into a 12V outlet…

view full answer...

Answer 7

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 8

I sure can Galen, and thanks for the information. Since your Tiffin motorhome has the air line connection you'll need the Demco Air Force One Flat Tow Brake System for 2020 and Newer Tiffin Chassis RVs w/Factory Air Brakes item #DM55MV. This…

view full answer...

Answer 9

Hey Jim. The Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR is indeed compatible with the LED lights on your 2025 Jeep Wrangler Unlimited. It plugs into your factory wiring harness behind the tail lights. The only issue would be if…

view full answer...

Answer 10

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

view full answer...

Answer 11

Hey Robert, the only frame mounted base plate kits we have for your 2021 Jeep Wrangler Unlimited like the Roadmaster part #RM-521453-5 require either the factory steel or plastic bumper to verify for sure they will work. For aftermarket bumpers you…

view full answer...

Answer 12

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Will Crossbar for Roadmaster Falcon 5250 Tow Bar Fit New Falcon 2 Tow Bar

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching