Replacement Control Panel for Leveling System on 1995 Fleetwood Motorhome

Question

Question:

Looking for this replacement panel. All wiring is good and cylinders work.

asked by: Justin G

0

Expert Reply:

We had another customer with a '94 Bounder in need of the same control panel for their Lippert Power Gear leveling system and Lippert was able to confirm that kit # LC359259 would work. I shared your photo with my tech contact there and he confirmed the item referenced above will work for you.

expert reply by: Adam R

0

click to enlarge

Joe

6/14/2025

Are there any available for sale?

Kate F.

6/16/2025

@Joe You can still purchase them from us Joe, the Replacement Lippert Power Gear Manual Leveling Control Kit # LC359259. Looks like they are currently out of stock, the earliest you would get it is July 29th. Were you hoping to get it a little sooner, or will that work?

Joe

6/17/2025

@KateF what is the cost

Kate F.

6/17/2025

@Joe Our prices do fluctuate so we can stay competitive, the cost right now is $814.42 for the Replacement Lippert Power Gear Manual Leveling Control Kit # LC359259.

See All (5) Replies to Joe ∨

Answer 1

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 2

Are you only installing the #LC82FR (500731)? To replace your 500210 you will need the full kit #LC359259. There are also wiring changes you will have to make at the pump assembly before it will work. After speaking with Lippert it sounds like this…

view full answer...

Answer 3

I believe you will need the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259 for your 1996 Fleetwood Discovery. You will need to remove the control panel to determine if you have the old style wiring connection or the new style…

view full answer...

Answer 4

I believe you meant to type that your touch pad was part number 500210 which the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is a correct replacement for.

view full answer...

Answer 5

Sounds like the control panel was fried when the dealer messed up the wiring. Only solution will be an all new control panel with the part #LC359259 which we have confirmed fits the now discontinued Power Gear 500210 leveling system.

view full answer...

Answer 6

Yes, The Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is the correct key pad control unit you will need per Lippert for your 1998 Chevy Southwind Storm Motorhome using the 500210 Milwaukee cylinder board. I…

view full answer...

Answer 7

To upgrade from your 500210 Power Gear Touch Pad you will in fact need the Replacement Lippert Components Power Gear Manual Leveling Control Kit #LC359259, which comes with a new touch pad, 8-pin harness and 6-pin harness. A 4-pin harness will not be…

view full answer...

Answer 8

I reached out to my contact at Lippert and he said that it sounds like you have an older Power Gear Manual Leveling kit that had the ground running from the solenoid to the control board. This new kit, part #LC359259, can be used as a replacement but…

view full answer...

Answer 9

The plug that includes the red wire from the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259 will plug into the back of the control panel and then the other end will plug into the connector coming off of the pump. The other…

view full answer...

Answer 10

According to Lippert, all of the parts in the kit should be used. There are, however, some wiring changes that have been made at the pump assembly for the system to operate. The 6-pin wiring harness that you are referencing plugs into the back of the…

view full answer...

Answer 11

Hey Keith! I did some research it and does look like you have the older Power Gear control board meaning you will need to change the wiring that used to be used for power and ground that side of the solenoid. I've attached a wiring diagram for…

view full answer...

Answer 12

To replace your Power Gear controller #500457 you will need the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259. This will give you a new touchpad controller and the wiring necessary to work with your system.

view full answer...

Replacement Control Panel for Leveling System on 1995 Fleetwood Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching