Replacement Bevel Gears for HappiJac 4800 Series Jack

Question

Question:

Will this part also work for the happijac 4800 series jack?

asked by: Daniel A

0

Expert Reply:

I reached out to the manufacturer who told me the Replacement Bevel Gears for HappiJac Truck Camper Jack System # LC182851 will fit and work on your HappiJac 4800 Series jack.

expert reply by: Kyle S

0

Doug C.

6/9/2020

4800 jack ,very noisy,it’s not the motor, what to do? 2019 1165 eaglecap

Chris R.

6/12/2020

Is the jack physically operating okay? Do you notice any jumping/jerking as it extends, etc? I'm thinking it's likely an issue with the internal gears just based on the noise alone. To replace them you can use the Bevel Gears # LC182851 mentioned above.

Doug C.

6/12/2020

@ChrisR thank you

Chris R.

6/16/2020

@DougC No problem at all. Let me know if you have any further issues or questions.

Answer 1

Yes, for your older Happijac square tube jacks the bevel gear set part #LC182851 is what you'll need. The install is pretty easy. It's basically just a matter of taking the jack apart and reinstalling it the same way you took it apart.

view full answer...

Answer 2

I took a look in the owner's manual for the HappiJac Camper Jack 4600 and found the following under maintenance which I have attached for you below. Therefore, no, it's not advised to completely disassemble the jack to service the screw per…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Replacement Bevel Gears for HappiJac 4800 Series Jack

Product Page this Question was Asked From

Continue Researching