Can Bearing Buddies Be Used on Utility Trailer
Updated 02/01/2012 | Published 01/29/2012
Products Featured in This Question
Question:
I recently bought a small utility trailer. Can I replace the bearings with buddy bearings. I will be doing a lot of traveling with this trailer. It would make it a whole lot easier if I didnt have to take the wheel off to grease the bearings the old way. Also how would I identify what the right size of the new bearings would be? Thanks
asked by: Phil S
Expert Reply:
Although bearing buddies are primarily meant for boat or PWC trailers, you can certainly use them on a utility trailer. To choose the correct diameter Bearing Buddy, measure the outside diameter of your grease cap the inside diameter of your hub bore. This measurement will be the correct Bearing Buddy size for your hubs. The measurement needs to be pretty precise, using a digital caliper works best.
Even if you are using bearing protectors, you should still pull the hubs every now and then to ensure the bearings and spindles are in good shape. When using bearing protectors, be sure to use a double-lip grease seal, which can help prevent grease from blowing out the seals. If they are still in good shape, you can continue to use your existing bearings.
If your outer bearings are the # L44649 that you referenced, the hub bore should be 1.980 inches. If this is indeed the case, I would recommend the stainless version, part # BB1980A-SS. Part # RG06-020 is the double lip seal appropriate for the L44649 bearings. The seals are sold in pairs.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Axle EZ Lube Grease Caps 1.99 Inch OD - DX69HR
- Q&A: Availability Of Double Lip Grease Seal With 1.5" ID And 1.983" OD
- Q&A: Difference Between Grease Seal 10-9 and 10-60
- Q&A: Replacement Grease Seal with 1.50" Inner Diameter and 1.987" Outer Diameter
- Shop: Valcrum Hydro-Shield Waterproof Aluminum Oil Bath or Grease Cap for 6K to 9K Axles
- Video: All You Need to Know About the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: LED Trailer License Plate Light: The Breakdown
- Video: In-Depth Review of the Optronics LED Trailer Tail Light
- Video: Review of the Snap-on Reflector Ring for Flange or Surface Mount Trailer Lights
- Shop: EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Shop: Grease Seals (pair)
- Shop: LED Trailer License Plate Light - Submersible - 2 Diodes - Rectangle - Clear Lens
- Shop: LED Trailer License Plate Light - Submersible - 2 Diodes - Round - Clear Lens - Female Plugs
- Shop: Grease Seal
- Shop: Replacement EZ Lube Drive-In Grease Cap - 1.986" OD - Qty 1
- Search Results: 2 inch bearing buddy
- Shop: Brake Controller
- Shop: Trim Kits
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Does Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 Have Ceiling Garnish
on Trailer Bearings Races Seals Caps
