Dimensions of the Bolt Holes on the Replacement Master Cylinder Assembly T4820000
Published 05/08/2019
Question:
Conner What is the bolt pattern for the 4 bolts on the top of the master cylinder where it attaches to the inside of the tube on part number T482000 On part number T4839100 the space between the pivot pin and bolt is 3.25 as is the one on my trailer making it 4.0 in on center What is the distance vertically flange to flange distance on the trailer side of the pivot I believe that the trailer was built by reliable But I don’t know what components they used but it looks just like T4839100
asked by: Dan W
Expert Reply:
I went out to our warehouse for you and took the measurements that you requested. I have attached these for you below in a photo. The bolt holes on the Replacement Master Cylinder Assembly part # T4820000 are 3-5/8" long x 1-5/8" wide. The flange on the Swing-Away Actuator w/ Electric Lockout part # T4839100 is 5" tall inside to inside or 5-1/2" tall outside to outside.
Product Page this Question was Asked From
Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Dexter
more information >
Continue Researching
- Search Results: dw05744
- Video: All About the Deka Heat Shrink Butt Connector
- Video: Deka Butt Connectors Detailed Breakdown
- Shop: Replacement Shock Absorber for Dexter Model 60 Brake Actuators
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Shop: Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Shop: Deka Wire Crimp Connector - 4 Gauge - Qty 10
- Q&A: Replacement Master Cylinder and Backup Solenoid for Titan Model 60 Trailer Brake Actuators
- Q&A: Correct Replacement Master Cylinder For a Titan Model 60 Actuator for Disc Brakes
- Q&A: Replacement Master Cylinder Recommendation for a Titan Model 60
- Q&A: No Brake Fluid Pumping on Model 60 Actuator With New Master Cylinder
- Q&A: Using Gasket Sealer on Lid of Titan # T482000 Replacement Master Cylinder
- Q&A: Recommended Replacement Master Cylinder for a TCIC 23361
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer tires and wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
- Video: Clean Up Your Trailer Wiring
- Search Results: trailer jack
on Accessories and Parts
