Replacement Master Cylinder and Backup Solenoid for Titan Model 60 Trailer Brake Actuators

Updated 07/13/2011 | Published 07/12/2011

Products Featured in This Question

Solenoid Shield for Dexter Model 60 Trailer Brake Actuators - Zinc

(53)

$15.25

Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500 Brake Actuators - Drum

(216)

$143.89

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(266)

$77.94

Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc

(78)

$137.85

Question:

I have a new Titan Model 60 Actuator on a new marine boat trailer. The back up solenoid T474800 was stepped on and the brass fitting broke of in the reservoir. Is it repairable? If not, I have a new Titan model 66 actuator that I could swap out. Will the back up SolenoidT4174800 work on that actuator? If so, then I could just buy the solenoid from you and swap out to the Titan 66 with little rewiring hassles. Thanks

asked by: Jody W

Expert Reply:

Since the fitting broke off, there could be other damage to the master cylinder, so I would recommend that if you keep your Model 60 Actuator, replace the master cylinder with # T4820000 for disc brakes or # T4395100 for drum brakes.

The Replacement Solenoid Valve for Titan Brake Actuators, is # T4748800. It fits Titan Model 6, Model 60, Aero 7500, Model 10, and Model 20 actuators. I could not find any information on a Model 66.

expert reply by: Michael H