Recommended Replacement Master Cylinder for a TCIC 23361
Updated 07/26/2026 | Published 08/23/2022
Products Featured in This Question
Question:
I am looking to replace this master cylinder for the surge brake on my 2000 Four Winns trailer with disk brakes. Can you tell me which part number to order? Thank you
asked by: Robert D
Helpful Expert Reply:
Thanks for the pictures! It looks like you have a TCIC 23361 master cylinder. The Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators item # T4395100 is the replacement for it. However, this is a drum brake master cylinder. You may want to verify what actuator you are using.
If you end up deciding to upgrade your old coupler to one that is compatible with disc brakes I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator item # 099-175-20. This actuator has a 7,500 lbs capacity, fits a standard 3" channel, and has a 2" ball.
I included a video of the Titan item # T4395100 for you to take a look at.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Search Results: kodiak 225 caliper
- Search Results: how to measure for dust caps
- Search Results: lube
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500 Brake Actuators - Drum
- Q&A: Replacement Master Cylinder For Titan Model 60 W/ 23361 Master Cylinder
- Video: Replacement Bleed Port for Kodiak Disc Brake Calipers Feature Review
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Rubber Plug - DC-RP
- Q&A: Is It Normal for Trailer Wheels to Bow Out At the Bottom
- Shop: TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long
- Shop: TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 36" Long
- Shop: Replacement Rubber Piston Seal for Kodiak Disc Brake Calipers - 3,500 lbs to 6,000 lbs
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 7,000 lb to 8,000-lb Trailer Brakes
- Q&A: How to Remove the Outer Brake Pads on the 10" Rotor Kodiak Disc Brake Kit K2R35S
- Shop: Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
- Video: Deka Butt Connectors Detailed Breakdown
- Video: All About the Deka Heat Shrink Butt Connector
- Search Results: dw05744
- Video: Review of Titan Brake Actuator - T4820000
- Q&A: Correct Replacement Master Cylinder For a Titan Model 60 Actuator for Disc Brakes
- Q&A: No Brake Fluid Pumping on Model 60 Actuator With New Master Cylinder
- Q&A: Replacement Master Cylinder Recommendation for a Titan Model 60
- Q&A: Dimensions of the Bolt Holes on the Replacement Master Cylinder Assembly T4820000
- Search Results: master cylinder
- Search Results: titan brake actuator
- Video: Titan Master Cylinder Assembly Installation
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Accessories and Parts
Eric S.
7/25/2026
What about T4820000?