Gooseneck Hitch Plate that Curt Gooseneck Rail Kit # C31301 Fits

Question

Question:

Can this work with the curt 61100 fixed ball

asked by: Kyle

1

Helpful Expert Reply:

The most similar gooseneck plate that the Curt rail kit part # C61301 that you referenced is designed to fit is the Curt Gooseneck Plate part # C65500. The part number # C61100 would not fit this rail kit.

expert reply by: Jameson C

1

Answer 1

I spoke with my contact at Curt and sent him everything you sent me including the pictures and here is what he responded with: Typically we recommend our universal over-bed installation kit, part #C61502, compatible for the over-bed folding &…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hi Kaleb, great question. I know combining air bags with a B and W Turnoverball hitch can be tricky, but there is a good option that works with your setup. With the B and W Turnoverball Hitch part #BWGNRK1108 on your 2002 Ford F250 4x4 long bed. One…

view full answer...

Answer 7

Hey there Trace! There are parts of the steel brackets that come into contact with the aluminum bed on your new 2026 F350 Super Duty (congrats on the new truck by the way - those are super nice!). B&W says to use strips of polypropylene tape…

view full answer...

Answer 8

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 9

Hey Tyler! The B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW73FR is the correct model for your 2025 Ford F-250. This does not come with a wiring harness so you will also need the Curt 5th Wheel/Gooseneck Custom Wiring Harness #C57008.…

view full answer...

Answer 10

Hello Jeffry, Great question. The OEM prep package (Original Equipment Manufacturer prep package) is a super handy factory option that makes towing with your truck a whole lot easier, especially if you're planning to use a 5th-wheel or gooseneck…

view full answer...

Answer 11

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 12

Got you covered Pete, thanks for reaching out! For your 26 Chevy 2500HD, the Curt EZr Double Lock Underbed Gooseneck Hitch #C65HR has the best overall value between cost effectiveness and towing capabilities. The Curt EZr is rated for 30k lbs, so it…

view full answer...

Gooseneck Hitch Plate that Curt Gooseneck Rail Kit # C31301 Fits

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching