You will need the B&W Turnoverball Gooseneck Custom Installation Kit for Dodge, part # BWGNRM1308, if you only need the mounting brackets without the center section. If you need the center section as well, the part you need is Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs, part # BWGNRC907.
I have included product description links below. view full answer...
Your best helper spring option will depend on what all you use your truck for.
If the primary use is towing a 5th wheel, I'd honestly go with something like the SumoSprings # SSR-139-40-2 for 4WD trucks or # SS29MR for 2WD trucks. The SumoSprings product offers 3000 lbs of additional support and is ideal for gooseneck or 5th wheel towing situations where the weight applied to the rear suspension doesn't vary much. The SumoSprings won't affect your ride quality until a load applied to... view full answer...
I do have an option for you but the B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC part # BWGNRM1067 is designed for the 2500 HD.
I recommend the B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC part # BWGNRM1059 for the 2003 Chevy 1500 HD. The whole kit with the plate and ball is part # BWGNRK1059. view full answer...
We have exactly what you are needing.
Your 2009 Chevrolet Silverado 1500 with the 8' bed uses the B&W Turnoverball Gooseneck Hitch # BWGNRK1007 but since you already have the center section you will need install kit # BWGNRM1007.
This includes everything but the center section, and while you already have the rails the mounting plates cannot be purchased by themselves.
i included a review video of the # BWGNRK1007 for you to take a look at. view full answer...
B and W has the part # BWGNRK1062 as a fit for the 3500 long bed models of the 2007 Chevy Silverado and the # BWGNRK1067 as a fit for the 2500HD models. The bracket designs are quite a bit different and it looks like the holes in the truck frames are different between the two models. view full answer...
The # BWGNRM1067 is for the Silverado 2500. For your 1500 model, you'll want to use # BWGNRM1057 which is compatible with the # BWGNRC959 center section. The 4 inch diameter mounting hole will be centered at 44-1/8 inches forward of the rear edge of the bed (not the tailgate). You can see the installation video by using the provided link.
If you don't already have a 7-way installed in the truck bed, you can use # 20110. I've linked an installation video for you.
view full answer...
Enhancing the suspension of your 2006 Ford F-350 while towing with B&W Turnoverball Gooseneck Hitch # BWGNRK1108 will improve your ride, though it is not a requirement to tow. What air bags will do is allow for an even load distribution because they inflate individually. They also improve your truck's handling and prevent it from sagging.
There is only one air bag kit that fits your '06 Ford F-350 that will work with a gooseneck hitch, the Firestone Ride-Rite Air Helper Springs # F2400,... view full answer...
The # BWGNRM1067 is just the rail kit and does not come with the center hitch section. The part number you need instead that comes with everything is the part # BWGNRK1067. This is rated for towing a trailer up to 30,000 lbs. The vertical weight capacity of the hitch is 7,500 lbs.
I attached an install video for this kit for you to check out as well.
Here's a list of all of the trucks this fits:
2008 - 2010 GMC Sierra 2500 - 6-1/2 Foot Bed
2007 - 2007 GMC Sierra New Body 2500... view full answer...
The Gooseneck Trailer Hitch Installation Rail Kit - Dodge Ram Trucks # 4439 is not a fit for the Curt Hitch 61052 Folding Ball Gooseneck Hitch # C-52. Instead you will want to use the Fold-Down Gooseneck Trailer Hitch # 8339 designed to fit that Reese Rail Kit. view full answer...
To view the install instructions for the Curt 600 Series Gooseneck Hitch Install Kit part # C60657, simply click on the provided link.
This kit is designed for use with the Curt Double Lock; Quick Goose 2; or Underbed Folding gooseneck hitch. The kit is a confirmed fit for the 2009-2012 Dodge Ram 1500.
If you do not have the in-bed wiring harness, part # PK11893-11932 is available.
view full answer...
In order to use your B&W Companion on your 2018 Toyota Tundra, you would need the Custom Turnoverball installation kit # BWGNRK1257-5W. I've added a link to a video review of this product for you to take a look at. view full answer...
There is a way to mount the Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs # BWGNRC900 in your 1999 Dodge Ram 2500, and that is by using the B&W Turnoverball Gooseneck Custom Installation Kit for Dodge # BWGNRM1394. This will give you the rail kit that the center section will bolt into and is a custom installation for your Ram 2500. view full answer...
The Draw-Tite # 4456 gooseneck rail kit works with 2011-2019 Chevy Silverado/GMC Sierra 2500/3500 models only. For a 2000 Chevy C/K series (not the Silverado, 2000 was a split model year), you'd need the # 4440 rail kit which is compatible with the Draw-Tite # 8339 Fold-Down Gooseneck Hitch. view full answer...
The correct B&W gooseneck hitch/installation kit for your 2007 Chevrolet Silverado 3500 Classic dually is their part # BWGNRK1062. This and all other gooseneck hitch fits for your truck are shown on the linked page.
Your old B&W gooseneck hitch # BWGNRM1067 only fits the New Body style 2007 Silverado 3500 1-ton, not the Classic. I confirmed this with B&W.
If you need an in-bed wiring harness you can use # 50-97-410 from Bargman, which plugs in at your existing 7-way. view full answer...
Yes, the B and W Turnoverball rail kit # BWGNRM1067 does fit your 2006 Chevy Silverado 2500HD long bed diesel. The complete gooseneck kit you'd need is the part # BWGNRK1067. view full answer...
The Curt gooseneck rail kit you mentioned does not fit your 2005 Ford F-250 short bed and also this is just a rail kit and not a complete hitch setup. For a Curt folding hitch that does fit your truck you'd want the part # C61332-52.
Or for just the rails # C61332. view full answer...
Yes, you can reuse the center section of the B and W gooseneck hitch you have with the correct bracket kit # BWGNRM1012 and you'd be set. This is the bracket kit that your 2015 Chevy Silverado 2500HD uses. view full answer...
Yes, I did some checking and the B and W Rail Kit part # BWGNRM1067 is a fit for your 2006 GMC Sierra 2500HD.
As long as you have the head part # BWGNRC959 already you would be good to go. view full answer...
You're absolutely correct. To install the Draw-Tite 9465 Hide-A-Goose center section on your 2019 Ford F150, you would indeed use the # 4491 Gooseneck Hitch Install Kit.
If you'd like to install a 7-way trailer connector in the truck bed so you don't have to run the trailer connector up over the tailgate, you can install one using part # 20110-010. You can see an install video for this trailer connector by using the provided link.
view full answer...
The correct B&W Turnoverball Gooseneck Installation Kit for your 2012 Chevy Silverado 3500 is the part # BWGNRM1012. For the hitch itself to use with the rails you will use part # BWGNRC912 or for the kit that includes both the correct part is # BWGNRK1012.
I have attached a complete installation video that you can also follow along with.
The B&W Turnoverball Install Kit # BWGNRM1016 that you referenced is designed for newer GM truck models (starting in 2016) and won't line up to... view full answer...
The most similar gooseneck plate that the Curt rail kit part # C61301 that you referenced is designed to fit is the Curt Gooseneck Plate part # C65500. The part number # C61100 would not fit this rail kit. view full answer...
Since you have the B and W gooseneck center section you'd just need the rail kit part # BWGNRM1059 for your 2004 GMC Sierra 1500 long bed. view full answer...
While it is completely understandable for you not to want to pay for parts you aren't going to use, the brackets by themselves are not available separately for the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1067 that fits your 2001 GMC Sierra 2500HD.
The only way to get them is with the B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC # BWGNRM1067, which is the correct installation kit for the Turnoverball that fits your '01 Sierra.
view full answer...
Yes, the Reese Gooseneck Installation Kit, part # 4449, attaches to the frame rails of your truck and to your gooseneck hitch. Part # 4449 is the installation kit that attaches the gooseneck hitch to your 2000 Ford F-350.
The Reese Gooseneck Installation Kit # 4449, will fit your 2000 Ford F-350 Super Duty Ext Cab Dually with 8 foot bed and is compatible with the Reese Fold Down Gooseneck System.
I have linked instructions for the Reese Gooseneck Installation Kit, part # 4449. I have... view full answer...
If you are just looking for the B&W Turnoverball Gooseneck Custom Installation Kit then you would need part # BWGNRM1313 for non-mega cab or part # BWGNRM1308 for mega cab models of your 2007.5 Dodge Ram 3500. Please note that neither of these kits come with the center section that you need to mount a gooseneck hitch ball or the B&W Companion. If you need this as well then you can use the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRC800 for non-mega cab or part # BWGNRC907... view full answer...
The B&W Turnoverball Gooseneck Custom Installation Kit for Dodge # BWGNRM1313 is a fit for the B&W Turnoverball Underbed Gooseneck Trailer Hitch center section # BWGNRC900. This combination is not compatible with your 2017 Ram short bed. It fits Dodge and Ram from 2003-2013 on certain models.
You will need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1309. This kit uses the B&W Turnoverball Gooseneck Custom Installation Kit... view full answer...
I have attached a link to the product page that lists the hitches we have available for your 2005 Silverado. You can use the drop down box to select the bed length at either 6-1/2 or 8 ft bed for a 2500 HD.
None of the hitches we offer for a 2004 1500 Silverado are designed to fit a 2005 Silverado 2500 HD. view full answer...
The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2019 Chevrolet Silverado 1500 is part # BWGNRK1019 (All Bed Sizes) which is composed of the B&W Turnoverball Gooseneck Custom Installation Kit part # BWGNRM1019 and the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRC919 so yes.
The correct B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter would then be part # BWRVK3500 or part # BWRVK3400. view full answer...
The Draw Tite Rail Kit for gooseneck hitches part # 4456 that you referenced is only designed to work on 2011 and newer (2015 currently) GMC trucks. There is no way to use it on a 2005 GMC.
Instead you would need the part number # 9465-34. I attached an install video for you to check out as well. view full answer...
I spoke with my Bulldog contact and found that the now discontinued 9475 head is the same as the current Draw-Tite Hide-A-Goose # 9465. The installation kit for that and your 2008 Dodge Ram 2500 Quad Cab short bed is # 4435. view full answer...
There isn't a specific fit for your 2006 Ford Super Duty Cab and Chassis. You would need to use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs # BWGNRK1500 and weld custom for your truck. Another option is the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch # 3375613500 which is very similar.
Your other option is to use the Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt # RP30035 which will... view full answer...
The Bulldog model 947533 gooseneck hitch that you found is just the hitch itself so it's really a universal type fit. The install hardware and frame brackets used to install the hitch is what will be specific to your 1998 Dodge Ram 2500.
We do not have this particular Bulldog model available but we have checked with them before and it is essentially the same as the Hide-A-Goose Hitch from Reese. Because of this you can use the Installation Rail Kit # 4439 to install the Bulldog hitch... view full answer...
B&W does list gooseneck trailer hitch # BWGNRK1104 as a fit for all bed lengths of the 2014 Ford F-150 so that would include, well, all bed lengths! Since your 5-1/2 foot bed is so short you will probably need an offset ball to get more clearance when making turns. Ball # BWGNXA4085 offers 4 inches of offset and will fit the hitch.
To add an in-bed 7-Way trailer connector you can use # PK11893-11932. view full answer...
The correct part number for the B and W Gooseneck hitch for your 2015 Chevy Silverado 1500 short bed is the part # BWGNRK1057 which means for just the rails and not the hitch center section you'd want the part # BWGNRM1057. view full answer...
Yes, the correct bracket and hardware kit you need is the part # BWGNRM1313 that you referenced as the correct B and W Gooseneck hitch for your 2013 Ram 2500 Short Bed is the # BWGNRK1313. view full answer...
I spoke with my technical contact at B and W and the center piece from the gooseneck hitch on your Dodge is not compatible with the B&W Turnoverball Gooseneck Custom Installation Kit, # BWGNRM111, for your 2012 Ford F-250. You will need to get the complete set-up, B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit, # BWGNRK1111.
Each hitch and installation kit are engineered for use in specific vehicles and the ball hole placement as well as the bolt hole locations... view full answer...
The 4440 Gooseneck Trailer Hitch Installation Rail Kit is designed for the 1988-2000 Chevrolet old body style 6 and 8 foot beds. For the 2500 HD Classic from 2001-2007 and for the 2007-2009 2500 HD New Body Style you will need part number 4434, for a 6 or 8 foot bed. I have posted a link to this item and to a installation video below for you. view full answer...
Your 1994 Ford F-250 2WD 8' bed with the 7.3 diesel will need one of two installation kits depending on if it has overload springs.
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1110 is for your truck if it has the factory overload springs. This kit will use the Installation Kit # BWGNRM1110 and Center Section # BWGNRC800.
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1100 is for your truck if it does not have the factory overload springs. This kit... view full answer...
The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BW57FR is designed to fit the 2021 Ford F-150 so it is not compatible with your truck. You need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1012. Once this is installed, you will be able to use a hitch like the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs # BWRVK3500.
Regarding your air bags, it looks like all... view full answer...
When installing a B&W Turnoverball Gooseneck Customer Installation Kit on your 2003 Dodge Ram Pickup 3500 Short bed The B&W Kit # BWGNRM1313 is the correct one for your vehicle.
This rail kit lets you install your B&W Turnoverball gooseneck trailer hitch # BWGNRC900. (Sold Separately) This kit has a powder coat finish that resists corrosion, and it is made in the USA.
I attached a review video link below.
view full answer...
The older Bulldog gooseneck hitch 947533 is essentially the same thing as the newer Hide-A-Goose kit from Draw-Tite and there is a rail kit that will work for you.
For a 2012 Ram 2500 what you will need is the Gooseneck Trailer Hitch Installation Rail Kit - Dodge Ram # 4435 to install this gooseneck. I have added a link to a video install for you to check out as well. view full answer...
The B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC # BWGNRM1012 will not allow you to use the middle section off your current hitch. I reached out to my contact at B&W and the center sections for those two hitches are not identical measurements and capacities. Your 2008 Ram 1500 used a number 900 center section and the 2011 Chevy Silverado 3500 uses a number 912 center section, so they are not compatible.
You will need to get an entire new system, and the confirmed... view full answer...
For your 2008 Dodge Ram 2500 short bed quad cab Draw Tite offers the part # 9464-35 as a confirmed fit which consists of the 9460 hitch head and the 4435 rail kit. At this time Bulldog does not offer any gooseneck hitches for your truck, but Draw Tite is made by same company as Bulldog. I attached an install video for this hitch for you to check out as well. view full answer...
The center section the # BWGNRM1313 is designed to fit is the part # BWGNRC900. This would be the same center section used when installed in a 2008 GMC Sierra 2500 so this would be all you need. view full answer...
Since the B and W Turnoverball gooseneck hitch that fits your 2004 GMC Sierra 2500 LD is the # BWGNRK1059 the correct rail kit would be the part # BWGNRM1059. view full answer...
If you are just needing the rail kit, you will need # 4449. To measure where to drill the hole if you plan on installing the Hide-A-Goose Gooseneck trailer hitch with the rail kit, # 4448, measure from rear of the bed (centered between the wheel wells) 46-3/16 inches toward the cab. Once at the 46-3/16 inch measurement, mark and drill a 1/4 inch hole. Using a hole saw, enlarge it to a 3-1/2 inch diameter.
If you are wanting the gooseneck trailer hitch, hitch ball and rail kit, then go... view full answer...
Draw Tite (formerly Bulldog) has a hideaway style gooseneck hitch that fits your truck but it used the center section # 9460 instead of the 9465 that you have so you wouldn't be able to reuse what you have currently. So what you'd need to do is go with the part # 9460-49 for a complete hitch that fits your truck.
I attached an install video for this for you to check out as well. view full answer...
For a rail kit that will fit your 1999 Chevy Silverado, I recommend the Draw-Tite Gooseneck Trailer Hitch Installation Rail Kit # 4454. This kit will use existing holes in the truck's frame for a no-drill installation and all of the necessary hardware is included. This kit is designed to work with Draw-Tite, Hidden Hitch and Reese gooseneck hitches. If you are able to tell me the manufacturer or model of your existing gooseneck hitch, I will be happy to confirm if this will work.
I... view full answer...
Yes, the Gooseneck Trailer Hitch Installation Rail Kit part # 4434 will fit your 2007 Chevrolet Silverado 2500HD and it will allow you to use your Bulldog Gooseneck Plate 947533. This kit is a custom fit so no drilling is required which you can see in the attached install video. view full answer...
The installation kit that will fit your 2012 Chevy Silverado 2500 long bed and Bulldog, Draw-Tite, and Reese gooseneck hitches is # 4456. The 4454 is for different years so it won't fit your truck.
I have linked a video that shows an example installation for you. view full answer...
If your Ford F-450 has an actual bed and is not a cab and chassis model (with a service bed or flatbed) then you can use the Curt universal folding gooseneck ball rail kit # C61502. You could then use Curt hitch # C-52 or # C65500. A custom hitch for a 1996 Ford F-450 is not available.
If you do have a cab and chassis model then you can still use # C65500 but it will require some custom fabrication by having a qualified professional first weld a 1/2 inch steel plate to the frame. view full answer...
Looks like you bought a Bulldog Hide a Goose gooseneck hitch like part # 9465 so to install this in your 2014 Ram 1500 all you need is the # 4446 and you'd be set as this is the correct rail kit view full answer...
I contacted B&W direct here and they do not have a direct bolt up kit for the 2017 Ford F-550 Cab and Chassis truck as they have a much narrower frame of 34" and they normally recommend that you use one of the center sections like the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRC800 and fabricate the mounting system to the frame of the Cab and Chassis.
Included is a video overview of this solution for your reference.
view full answer...
The B&W Turnoverball Gooseneck Custom Installation Kit # BWGNRM1319 that you referenced is for a Ram 1500 so it isn't compatible with your 1989 Ford F-350. Instead you want part # BWGNRK1110 if you have the Overload Springs or part # BWGNRK1100 if you don't have the Overload Springs. Please note that neither of these will fit if you have a Cab and Chassis or your F-350 has a 34" frame.
Attached are some review videos and installation instructions for you to check out. view full answer...
To install a gooseneck hitch on your 1997 Ford F-150 4x4 you will need to use the Curt 600 Series Gooseneck Installation Kit, part # C60637. This kit will install under the bed and use existing holes in the vehicles frame. This installation kit will only work with the Curt Double Lock, Flip and Store gooseneck hitch or the Curt Quick Goose 2 gooseneck hitch. I am including a link to the installation instructions on the Curt installation kit.
If you need the hitch and the installation... view full answer...
I wish we had a B and W Turnover gooseneck hitch fit for your 1973 Ford F-100 but B and W does not have any fits that go back that far.
We'd only really be able to help with with a universal setup like the Buyers Products Gooseneck Hitch Plate # 3373014981 which would need to be bolted to the truck's frame and body or can be welded to the floor of a structural steel bed. view full answer...
The B and W Turnoverball Hitch that fits your 2015 Ford F-250 is the part number # BWGNRK1111 which comes with everything from the install hardware, rails, to hitch center section. If you already had a center section and just needed the rails to install it in your truck instead you'd just need the # BWGNRM1111 and you'd be set.
I attached an install video for this kit on a similar 2015 Ford F-250 for you to check out as well. view full answer...
I checked with B&W and it looks like there are enough differences between the 1997 Dodge Ram 2500 and the 1999 Ford F-250 that a completely new B&W Turnoverball Gooseneck Hitch is needed. Even the center piece cannot be transferred from one truck to the other as they use different ball and bolt hole locations to accommodate the truck style it is designed to fit. The brackets that would be needed for your 1999 F-250 are not compatible with your existing center plate.
For your 1999 Ford... view full answer...
You should be able to re-use the center portion of your B&W Turnoverball system # BWGNRC950 and swap the installation rails. The correct installation rails for a 2005 Chevy 2500 (both 6-1/2 foot and 8 foot beds) are the # BWGNRM1067; these would allow you to swap trucks with your Turnoverball system. view full answer...
Yes for just the install hardware and rail kit to fit a B and W gooseneck hitch into the bed of your 2004 Chevy Silverado you'd want the part # BWGNRM1067. view full answer...
Going with a gooseneck or fifth wheel hitch will be up to you in the end, but I will get some pros and cons listed out for you so you can make an informed decision on the matter. To start with, lets look at the fifth wheel option.
The Reese Above Bed Rails # RP30035 will allow the Reese 5th Wheel Trailer Hitch # RP30047 to sit securely in the bed of your 1995 Ford F-350.
The Upsides:
-A fifth wheel like this is it is rated to tow a trailer weighing up to 16,000 pounds which will definitely... view full answer...
I'm glad you asked because we do have the correct part, though it is different than the one you referenced. I checked with the manufacturer, B&W, and the correct kit for your 2001 Ford F-350 Super Duty is the B&W Turnoverball Gooseneck Custom Installation Kit for Ford # BWGNRM1108. The part number you referenced is for later model year Ford trucks which is why it won't fit on your truck.
This installation kit will work with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRC800... view full answer...
The rail kit part # BWGNRM1316 fits 2002 through 2008 Dodge Ram 1500s so would not work with your 2014 model. Since you have the center section # BWGNRC900 all you would need is the rail kit # BWGNRM1309. view full answer...
The installation kit you will need for Bulldog gooseneck hitch 947533 and your 1990 Chevy 2500 pickup is # 4440. The one you asked about, 4454, is designed for models newer that yours. But # 4440 is the way to go for your truck. I have included a link to the installation instructions for you. view full answer...
In order to add a gooseneck trailer hitch to your 2014 Ram 3500 all you would need is a center section, the Hide-A-Goose Underbed Gooseneck Trailer Hitch part # 9466 is the most cost effective option we have for this. The bracing to support the above center section is already present so you will not need anything else.
The Gooseneck Trailer Hitch Installation Rail Kit part # 4439 will not fit as it is for much older models. view full answer...
The Curt # C61301 fits 2012-2019 Chevy 3/4 and 1 ton pickups, and wouldn't work for your 1995 K2500. If you're looking for an Overbed folding gooseneck hitch, I'd recommend the Curt # C61504-52, which includes the appropriate install bracket kit for your truck. If you needed the bracket kit only, that would be part # C61504
If you'd like to install a 7-way trailer connector in your truck bed, you can do so using part # 20023.
view full answer...
Custom Installation Kit for Curt Overbed, Folding Ball Gooseneck Trailer Hitch # C61332 would take a professional installer around 4 hours to install depending on their level of experience. A handy do-it-yourselfer would take about 8 hours. view full answer...
Great question, we do offer the B&W Turnoverball Gooseneck Custom Installation Kit for Ford # BW24FR. Safe to say that you're not the only one who has had the issue. This does include the top rails as well which you said you already had. But this will make sure you have all the hardware necessary to get the hitch installed properly.
While you're under there it would benefit you to install our Hopkins Endurance 5th Wheel/Gooseneck Wiring Harness # 41157. This will give you an in bed 7-Way... view full answer...
If you already have the hitch part of the Bulldog gooseneck hitch but need the installation kit for your 1998 Dodge Ram 3500 use # 4439. This is the installation rails and hardware so the only thing it needs is the hitch head part. view full answer...
We have just the rail kit for the gooseneck hitch you need part # BWGNRK1067 as the part # BWGNRM1067.
The center section required with this hitch setup is the part # BWGNRC959 that you mentioned as well. view full answer...
The only way to tow a fifth wheel trailer with a Ram truck like your 2016 Ram 2500 that has the Ramboxes is with a Sidewinder pin box. This moves the pivot point up higher so that it can clear the narrower bed rails. With gooseneck hitches this is not an issue so that wouldn't be a problem with the Curt # C60660.
With a Sidewinder setup though you have to use a fifth wheel rail system and could not convert a gooseneck hitch to a fifth wheel with an adapter. You'd need a rail kit like... view full answer...
The Custom Installation Kit for Curt Overbed, Folding Ball Gooseneck Trailer Hitch # C61341 is a fit for your 2006 Chevy 1500 short bed. It works well with the Folding Ball Gooseneck Hitch # C-52. This comes together as part # C61341-52. You may also want to consider the bed wiring kit # C56000.
I can't find the part you referenced so I can't confirm that fit. view full answer...
Correct, the B&W Turnoverball Gooseneck Custom Installation Kit part # BWGNRM1016 will allow you to transfer the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1012 from a 2011 Chevrolet Silverado 2500 to a 2016 Chevrolet Silverado 2500 which will then give you the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1016.
The reason that the B&W Turnoverball Gooseneck Custom Installation Kit is needed is because there was a generation change from 2014-2015... view full answer...
Yes, the Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch Head # 9465 and the Hide-A-Goose Trailer Hitch Installation Rail Kit # 4445 are exactly what you need for your 2004 Chevy Silverado 3500. We actually have these parts combined as the part # 9465-45 on our site if you go through the gooseneck fit guide for your pickup.
The instructions for both kits have been linked to this page for you to reference. view full answer...
The Hide-A-Goose Rail Kit Only, # 50111, that you referred to is the correct installation kit for your 2006 Chevrolet 1500 Silverado with 6-1/2 or 8 foot bed, but according to the manufacturer this kit will work with the older 63102 hide a goose head only and will not work with current model head, # 9465. The older head is no longer available. If you currently have a Hide-A-Goose head that is older than approximately 2008, then this may be the kit you need.
The current gooseneck trailer... view full answer...
Gooseneck trailer hitch installation kit # 4457 is designed for certain 2010 and newer Ram 2500 and 3500 series trucks. It is not a fit for your 2003. The installation kit by itself for your 2003 Ram 1500 is # 4438. But these are just the installation kits, not the whole gooseneck hitch and installation kit.
For hitch and install kit you can use # 9464-38, # 8339-4438, or # 6300-4438. I have also included a link to all of the gooseneck and install kits that will fit your truck. view full answer...
The B and W bracket kit part # BWGNRM1057 is the correct bracket kit for your 2008 Chevy Silverado 1500 as it is what comes with the part # BWGNRK1057 which is the brackets and the hitch center section.
If you already had the part # BWGNRC959 then all you would need is the part # BWGNRM1057 that you referenced.
I attached an install video for this for you to check out as well. view full answer...
I recommend the Custom Installation Kit for Curt Overbed, Folding Ball Gooseneck Trailer Hitch part # C61503 which is actually a custom fit for your 1994 GMC K3500 SRW Regular Cab Long Bed so no drilling is required. The Universal Folding Gooseneck Ball Rail Kit 61502 was designed for pre-1988 GMC C/K Series Pickups so it will not fit. The first kit is then compatible with the Folding Ball Gooseneck Hitch part # C-52. view full answer...
The installation instructions are included with the B and W Gooseneck Installation Kit # BWGNRM1316.
This rail kit lets you install the B and W center sections # BWGNRC900. Per the instructions, you will need to cut the hole 45-3/4 inches from the back of the bed (tailgate end). view full answer...
If you are looking for a Draw Tite gooseneck hitch for your 2003 Chevy Silverado 2500HD we have two options. We have the part # 8339-4434 for a fold down gooseneck or the part # 9465-34 for a removable ball setup.
The rail kit you referenced is not a fit for your truck. view full answer...
I can only guarantee that gooseneck installation kit # BWGNRM1394 will fit Turnover Ball gooseneck hitch # BWGNRC900. It has not been tested with any other gooseneck hitch. Valley has been out of business for a few years now so you are not likely going to find a Valley kit for your 1998 Dodge Ram. The best solution I can offer that will work for sure is to get a whole new hitch with an installation kit.
Draw-Tite Hide-A-Goose hitch # 9460-39 is the most cost effective and a very popular... view full answer...
I do have a solution for you, however the Draw-Tite Gooseneck Trailer Hitch Installation Rail Kit # 4454 referenced in your question is designed for Chevrolet/GM 1500 and 2500 trucks.
For your 2012 Ford F-250, I recommend the Reese Gooseneck Trailer Hitch Installation Rail Kit # 4449. This is custom-fit for your truck to allow for quick and easy installation using existing holes in the vehicle frame. The rail kit is compatible with Draw-Tite, Hidden Hitch and Reese gooseneck hitches.... view full answer...
The measurements you are looking for on the Gooseneck Trailer Hitch Installation Rail Kit - Chevy/GMC Trucks Item # 4454 are as follows:
One cross member
Length - 44" without frame brackets
Width/height - 2" view full answer...
I do have a solution for you, however the Draw-Tite Gooseneck Trailer Hitch Installation Rail Kit # 4435 referenced in your question will not fit your 1996 Dodge Ram. This particular installation kit is designed for later model year Rams, starting with the 2003 model year 2500.
For your truck, I instead recommend the Gooseneck Trailer Hitch Installation Rail Kit # 4439. This is confirmed to fit your truck and will be compatible with your existing Gooseneck Hide-A-Goose Trailer Hitch.... view full answer...
Gooseneck installation kit # 4435 does not fit the 2014 Ram 2500 but instead you will need # 9467 to add a gooseneck hitch. The 2014 Ram 2500 already has the necessary support structure to install the head only of a gooseneck hitch. No additional installation kit is needed. view full answer...
Yes, the Gooseneck Trailer Hitch Installation Rail Kit, # 4434, is the part you'll need in order to install the Fold Down Gooseneck Hitch, # 8339, on your 2007 Chevy Silverado. You may also be interested in the Fold Down Gooseneck Hitch Installation Template, # 6425, which is going to make your install of the hitch that much easier. view full answer...
A Signature Series/Elite Series underbed gooseneck hitch that you can bolt to the existing underbed installation kit is not available for the Reese installation kit 30069 for the 2001 Dodge Ram 3500. However there is a possible solution if you are open to an easily installed and removable above the bed hitch that uses the existing pucks from the existing underbed system.
You can use Reese Elite Series Above-Bed Gooseneck Trailer Hitch, # RP30845. It fits into the pucks just like a Signature... view full answer...
Yes, there is a gooseneck option for your 2012 Ram 1500 with a 5 foot 7 inch bed. You would want the Curt 600 Series Gooseneck Installation Kit # C60657 and the Curt Double Lock, Flip and Store Gooseneck Hitch # C60607. The ball of this hitch can be removed if needed. view full answer...
We have exactly what you are looking for.
I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1197 which is a confirmed fit for your 1997 Ford F-150.
B&W hitches are known for their durability and reliability so you know you will have a hitch that will serve you well. The square base of the hitch ball allows you to use the B&W Companion 5th wheel hitch # BWRVK3500 or slider # BWRVK3400 if your truck is a short bed if you... view full answer...
The hideaway gooseneck hitch I recommend for your 1998 Dodge Ram 2500 is the B & W # BWGNRK1394. It has a 30,000-lb gross towing weight and 7,500-lb tongue weight. The hitch ball can be engaged or disengaged from inside your 8 foot bed.
The custom fit wiring you will need is part # C56071. It is a RV-style connector that you mount in your 1998 Dodge Ram 2500 to hookup of your 5th-wheel or gooseneck trailer
If you don't have some already, I recommend using Loctite Threadlocker # LT37420... view full answer...
Yes, you can purchase the installation kit for the CURT gooseneck trailer hitch separately. For your 2011 Ford F-150 the correct kit would be CURT 600 Series Gooseneck Installation Kit, # C60641. This kit is designed for use with the CURT Double Lock, Flip and Store gooseneck hitch; CURT Quick Goose 2 gooseneck hitch; or CURT Underbed, Folding gooseneck hitch.
With a short bed, you may be interested in adding the CURT 4 inch Offset Ball, # C602, to give 4 inches more clearance than a... view full answer...
For the 2006 Dodge Ram 2500 with 6-foot bed (and not the Mega cab version) the correct Draw-Tite Gooseneck hitch is indeed # 9464-35. I verified this both in our fit guide and on the Draw-Tite website.
As you can appreciate, for liability reasons we cannot advise you to use a product that is not expressly defined by the manufacturer as being correct for your vehicle.
Certainly it may be possible to install the hitch you purchased on your truck. However, since this would be a non-standard... view full answer...
The Reese Gooseneck Hitch, # 9460, will fit on both the # 4435 installation kit and the # 4439 installation kit.
The difference between the two installation kits are what vehicles they will fit on.
The Draw-Tite Gooseneck Installation Kit, # 4435, fits 2003 to 2010 Dodge Ram 2500 HD, 3500 HD, including Mega Cabs and Dually. It also fits the 2006 to 2008 Dodge Ram 1500 Mega Cab with 6 ft. bed.
The Draw-Tite Gooseneck Installation Kit, # 4439, fits 1994 to 2001 Dodge Ram Full Size,... view full answer...
The Gooseneck Hitch Installation Rail Kit, # 4435, is the correct rail kit for your 2004 Dodge Ram 3500 Short Bed Diesel. This rail kit works with the Draw-Tite Remov-A-Ball Gooseneck Hitch, # 6300, and the Reese Fold-Down Gooseneck Hitch, # 8339. This is also a custom rail kit that does not require any drilling to install.
I have attached a link to the installation instructions as well as links to the gooseneck hitches for you to check out. view full answer...
The answer to your question will depend on if your Silverado 3500 is the new body style or the old. If the truck has amber turn signal lenses on the back, then it's a new body style and would use the same exact hitch as your 2500, just swap it over. If you have the old body style, both the center section and the rails/brackets are different so you wouldn't be able to reuse your center section and would unfortunately need a complete new hitch, part # BWGNRK1062.
If your 3500 doesn't have... view full answer...
If you were wanting just a Draw Tite gooseneck rail kit that fits your 2010 Ram 1500 6.5 ft bed you'd want the part # 4446 or for a complete hitch that includes this rail kit and a hitch assembly you'd want the part # 6300-4446. view full answer...
Go To Results