How to Lock the Demco Trailer Coupler Part # DM14040-81

Question

Question:

I have the DM14040-81 and I need a lock for it where I can use my OWN padlock.

asked by: Brad

0

Expert Reply:

I do have a way for you to lock the Demco Trailer Coupler part # DM14040-81 but I am not aware of any device that will allow you to lock it using your own padlock. The only way I am aware that the trailer coupler can be locked is with a pin style lock like part # e98888 which can be keyed alike if you have other trailers or a wraparound style lock like part # FA86-0015-318 which can also be keyed alike if you have other trailers. Take a look at the video to see this lock and how to get keyed alike locks.

I wish I had better news for you.

expert reply by: Conner L

0

Answer 1

A standard 50 degree coupler like #DM14793-81 will work on your custom 45 degree frame with a little modification. Without welding shims the coupler will not have the strength, so you will need to make some adjustments to your current tongue design.…

view full answer...

Answer 2

Hello Mark, thanks for reaching out. That Atwood 88007 coupler has been discontinued for a while now, so there are no replacement parts or repair kits available. The best option will be a whole new coupler, such as the A-Frame Trailer Coupler w/…

view full answer...

Answer 3

First I want to make sure you verify your channel mount for the Demco Trailer Coupler #DM14040-81 has a 21K or larger capacity as often times they are less like the Demco #DM15349-52 which often times people look at and think it is a channel mount…

view full answer...

Answer 4

Hi Dan! I have a couple potentially dumb questions. Are you sure you have a 1.5" hitch receiver? Was that measured at the inside or outside of the hitch opening? And if it is truly 1.5" for the inside of the receiver, what is this hitch on?…

view full answer...

Answer 5

Hi Jeff; when you replace your fenders you want to do your best to match the dimensions of the existing fenders. Even if they were replaced at some point, that is the way to go about it. Do you know the length of your current fenders? The Tandem Axle…

view full answer...

Answer 6

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

view full answer...

Answer 7

The Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K #DM14040-81 has an integrated 5/16 inch pin hole with a 3 inch span for that lockable feature. I recommend using the Trailer Coupler Lock #e98888…

view full answer...

Answer 8

Hey Richard, yes the hardware kit part #DM68UV is correct hardware kit for the Demco Trailer Coupler #DM88XR. That curve shape in the corners of the coupler are compensated for with the hole design in the coupler. Do you have the channel already…

view full answer...

Answer 9

The correct Kodiak Disc Brake Kit for a 5,200 lb axle is part #K2R526S for stainless or part #K2R526D for dacroment. In regards to compatibility, the brake mounting flange and spindle size are the only factors we can confirm. I don't foresee any…

view full answer...

How to Lock the Demco Trailer Coupler Part # DM14040-81

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching