Will Kodiak Disc Brake Kit Replace UFP Brakes On 5,200 Lb Torsion Axle

Updated 04/26/2021 | Published 04/23/2021

Products Featured in This Question

Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs

(95)

$1446.56

Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs

(166)

$521.49

Question:

I am replacing the brakes on a Magic Tilt boat trailer. It is dual 5.2K axles with UFP brakes currently 12inch rotors. I would like to try the Dacromat/Stainless package from Kodiak, but I am concerned about getting the calipers properly mounted. The torsion arm and spindle for the trailer is a Magic Tilt part# PH1330. Any assistance you can provide on the compatibility of the brake package with the caliper flange on the spindle/arm would be appreciated. I could not easily find any information on the proper depth of the brake flange, etc.. Alternatively, I am open to replacing the Torsion Arm/Spindle as well if there is a more compatible part available.

asked by: Grant P

Expert Reply:

The correct Kodiak Disc Brake Kit for a 5,200 lb axle is part # K2R526S for stainless or part # K2R526D for dacroment. In regards to compatibility, the brake mounting flange and spindle size are the only factors we can confirm. I don't foresee any issues but test fitting would be the only way to confirm. There are no exclusions for torsion axle trailers in general.

expert reply by: Conner L