Dimensions of Mounting Brackets of Ultra-Fab 2" Trailer Hitch part # UF35-946403

Question

Question:

what is the dimensions of the weld tabs of the hitch

asked by: Scott S

0

Expert Reply:

I have attached a photo with the mounting dimensions of the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames part # UF35-946403. The brackets are 2" long x 4" wide x 3" tall. If you need any other measurements then please let me know and I would be happy to go out to our warehouse and take them for you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I was able to find many photos of your 2010 Carriage Carri-Lite 5th wheel trailer, but I was not able to confirm the specs for its bumper or frame width. We offer two types of trailer hitch for use on the back of an RV such as your 5th wheel, a…

view full answer...

Answer 2

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703 will need to be welded to actual frame of your camper. If the distance between the frame is 72" or less you'll be able to use the #13703 to tow up to…

view full answer...

Answer 3

Yes, the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 is a multi-fit hitch that will work great on your RV that has a 350 lb tongue weight capacity and does not require a stabilizer strap like the Curt hitches do. As long…

view full answer...

Answer 4

You could weld the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 to the box frame that's welded to the frame of your 2019 Grand Design Imagine 2600RB travel trailer but would need to have a fabricator come out and look…

view full answer...

Answer 5

Appreciate the photos, and we do have a hitch for you, but the Curt #13703 is for a max 72 inch wide frame measured outside to outside of the frame, and it looks like yours is 73 inches. So what you will need instead is a weld-on hitch that is…

view full answer...

Answer 6

Thanks for the pictures. The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 you mention would be a great option for you since your trailer frame falls within the adjustable range and it has the beefed up tongue weight…

view full answer...

Answer 7

I'd begin by contacting Forest River to ensure that the frame members at the rear of your fifth wheel have sufficient capacity to carry the weight of the carrier and the scooter without damaging anything. If Forest River gives you the go-ahead,…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Dimensions of Mounting Brackets of Ultra-Fab 2" Trailer Hitch part # UF35-946403

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching