Can Bearing Buddies be used on Axles With Brakes
Updated 01/02/2019 | Published 12/31/2018
Question:
I was told bearing buddies are not good for rv trailer axles with brakes because the grease can get on the brakes. What are your thoughts. Thanks
asked by: Robert
Expert Reply:
You can use Bearing Buddies such as # BB1980A-SS on your trailer with brakes you just need to make sure you don't overfill them because if grease gets on brake pads the pads will need to be replaced.
So as long as you are sure you aren't using too much grease you will be fine; there are those that have a blue indicator ring that allows you to monitor the level of grease which is helpful. So the short answer is yes, you can use Bearing Buddies on trailers that have brakes you just need to make sure you apply the proper amount of grease.
I have added a link to a page with our selection of Bearing Buddies for you to check out.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2500 lbs Axle
- 3500 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will the Curt Replacement OEM USCAR Trailer Connector Fit a 2019 Ram 3500?
- Search Results: 25520
- Search Results: 25580
- Video: A Closer Look at the Curt Replacement OEM USCAR Trailer Connector
- Shop: Curt Replacement OEM USCAR Trailer Connector - Dual Connection - 7-Way RV Style and 4-Way Flat
- Shop: Replacement U-Bolts for Reese or Pro-Series Weight Distribution Spring Bar Lift Chains
- Q&A: How To Determine Blue Ox Spring Bar Weight Capacity
- Shop: Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars
- Video: Installing the Curt Replacement OEM USCAR Trailer Connector on a 2024 Ford Bronco
- Video: Comprehensive Review: Curt Replacement OEM USCAR Trailer Connector
- Video: Feature Review Camco RV Water Line Blow-Out Plug
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: Camco RV Polyethylene Propane Tank Cover for (1) 20-lb Steel Tank - Black
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Shop: Curt TruTrack 2P Trunnion Weight Distribution System w/ Sway Control - 7-Hole Shank - 12K GTW
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: All About the Water Heater Door Latch
- Q&A: Wheel Lug Nut Torque Recommendations for 1/2-Inch Stud and 12-Inch Aluminum Wheel
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Is There Fas-Top Topper that Fits 2024 Ford E-350 Long Bed
- Q&A: Difference Between Bearing Buddy 1980 Models
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Bearings Races Seals Caps
