How to Find Replacement Bearings for UFP Trailer Hub 13674
Updated 05/17/2023 | Published 05/16/2023
Question:
2006 Trailstar boat trailer UFP Hub 13674 bearings have no numbers on them. I want to replace bearings, races and seals.
asked by: Jerry J
Expert Reply:
I wasn't able to cross-reference these numbers but if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100. The other option would be to take the hubs off the trailer and either read the part numbers off the old bearings or measure them with a dial caliper to the nearest thousandth of an inch. I have attached an article that goes over this process in more detail.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer wheel hub
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 91" Long - 4,400 lbs
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer wiring bracket
- Search Results: trailer wiring
- Search Results: dexter 69 47 axle
- Search Results: d washer
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Shop: Curt Dual Connection Socket w/ Bracket - 7-Way RV Style and 4-Way Flat - Vehicle End
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Q&A: 2006 Yacht Club Boat Trailer Hub Replacement Recommendation
- Q&A: Replacement Trailer Idler Hubs For a 2007 Tracker TrailStar Boat Trailer
- Search Results: race punch
- Search Results: 3500 bearing kit
- Shop: Gooseneck Hitch
- Video: What to Know About the Red Identification Light Bar with White LED Utility Light
- Shop: Brake Controller
- Video: Complete Breakdown of the CE Smith Grease Seals
- Q&A: Replacement Trailer Seal for a 2000 Trailstar Boat Trailer Measuring 2.327 Outer and 1.676 Inner
- Q&A: What Kind Of Grease Is Used In The etrailer Pre-Greased Hubs AKIHUB-545-35-EZ-K?
- Q&A: Is There a Replacement Hub For a AL-KO 7170 Trailer Hub?
- Shop: Vehicle Tow Bar Wiring
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: Roof Rack
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles