Recommended Trailer Hitch and Towing Capacity for 2018 Dodge Grand Caravan

Question

Question:

I am wanting to tow a trailer with my 2018 Grand Caravan. Do you know how much it can pull? Can you recommend a hitch? THanks.

asked by: Katie

0

Expert Reply:

I took a look at the online version of the owner's manual for your 2018 Dodge Grand Caravan. The van's actual towing capacity will depend on how many passengers (including the driver) you have in the vehicle. The manual lists the following capacities:

Up to 2 persons and luggage - 3,600 pound towing capacity
3 to 5 persons and luggage - 3,450 pound towing capacity
6 to 7 persons and luggage - 3,000 pound towing capacity

For a trailer hitch I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75579 because unlike the alternative Curt option it does not require the use of additional stabilizing straps if you were to use the hitch for an accessory like a bike rack or cargo carrier. It will use existing holes in the vehicle's frame for a no-drill installation and it features a 4,000 pound towing limit. Just note you will still be limited by the capacity of your Grand Caravan since it is lower.

I have attached an installation video that you can use for reference.

Tow tow a trailer you will also need a wiring harness. For this I recommend the Curt T-Connector Vehicle Wiring Harness # C56331. This is a custom harness that will install by plugging into factory ports behind the tail lights and then running the hot lead up to the battery. This will provide you with a 4-Way connector to power a trailer's basic signal lights.

Lastly you will need a ball mount and hitch ball. I have attached a great article that explains how to choose the best one for your setup along with a link that will take you to our available selection.

expert reply by: Chris R

0

Mike R.

6/7/2020

How can I figure out how much tongue weight is being applied to a trailer? I'm thinking about trading in a Ram 1500 for a Dodge Caravan, but we need to tow a 19' boat.

Chris R.

6/11/2020

Using a simple scale like # BTBRV44FRis probably the easiest, most accurate method. You simply drop the trailer coupler onto the scale, and it will tell you how much tongue weight is being applied.

Abraham S.

7/26/2020

This is the exact information I'm looking for, but my one follow-up question is where can I find the wiring harness for a 7-way connection? The popup we will use is equipped with electronic brakes and a 7-way.

Chris R.

7/30/2020

To upgrade the 4-Way Wiring Kit mentioned above (which you will still need) you'll just have to add the Wiring Kit # ETBC7. This kit includes everything required to make this conversion and also install a brake controller (which you'll also need to power the trailer's electric brakes) like the excellent Tekonsha Primus IQ # TK90160.

Dee

8/3/2020

Will towing a pop up camper damage the van, transmission or engine in any way?

Jon G.

8/12/2020

As long as you aren't exceeding weight ratings and you are practicing safe driving habits then towing a camper with your van won't damage it. Obviously adding more weight to your whole setup will cause your engine and transmission to work harder so in those regards you will likely see a shorter lifespan on them but that's just the nature of towing anything with any vehicle.

Answer 1

The Firestone Coil-Rite Air Helper Springs #F4169 that you referenced are indeed a correct fit for the rear coils springs in your 2014 Chrysler Town and Country minivan. Installation requires you to pull off the stock jounce bumpers and drill a…

view full answer...

Answer 2

The etrailer.com hitch part #E98854 is a confirmed fit 2 inch hitch with plenty of capacity that is confirmed as a fit for your 2018 Dodge Grand Caravan. I recommend this hitch highly as it has great towing capacities at 4,000 lb trailer weight and…

view full answer...

Answer 3

Hey Don, we have the Firestone Coil Rite part #F4169 for your 2019 Dodge Grand Caravan which is a great option for additional suspension support. It's also the only fitting option we have for your vehicle as well. But the compressor kit part…

view full answer...

Answer 4

The yellow rubber inside the coil spring on your 2014 Dodge Grand Caravan is a jounce bumper. The jounce bumper is removed to install both the Air Lift #AL60814 and the Firestone #F4169 air helper springs. To remove the jounce bumper, you will pull…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Trailer Hitch and Towing Capacity for 2018 Dodge Grand Caravan

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching