Recommended Best Trailer Hitch Receiver for Bike Rack and Trailer Towing on 2019 Audi Q5

Question

Question:

trailer hitch for 2019 Q5?

asked by: Douglas

0

Expert Reply:

We have a couple trailer hitch options confirmed to fit your 2019 Audi Q5. We have the Draw-Tite Max-Frame Trailer Hitch Receiver # 76183 and the Curt # C13331. Both are a similar installation with the same rated capacities. The Curt hitch is my recommendation as it is more user friendly with accessory fit due to better bumper clearance while still being almost flush with the bumper when not in use.

If you will be towing with this hitch, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This harness uses zero contact interface sensors so there is no splicing into factory wires. You will use a power wire directly routed from your vehicle battery to power this harness. I've attached an article and a video to assist.

The final component for towing is an adjustable ball mount like # BWTS10035B to tow level. This ball mount also has a very cool stowable feature when not in use for a clean look. I recommend the locking hitch pin like # e98880 to secure your ball mount and deter theft.

expert reply by: Jason S

0

click to enlarge

Answer 1

The trailer hitch options for a 2019 Audi Q5 are all quite similar, I recommend the etrailer Trailer Hitch Receiver part #e94CR which is typically the most cost effective option. It has a 7,500 lb weight capacity with 750 lb tongue weight rating so…

view full answer...

Answer 2

For your 2018 Audi Q5 the Draw Tite hitch part #76183 is a really great option for carrying a bike rack. It has great weight capacities, is mostly hidden, and is also priced great. I am not sure what type of bike rack will suit your needs the best…

view full answer...

Answer 3

Hello Andrew, great question. I will start by saying that with our videos, generally you can assume that the tires and suspension are stock when we are measuring the hitch clearance. Although, we do not have the tire size or suspension type noted…

view full answer...

Answer 4

Yes, it does! The etrailer Hitch item #e94CR has been confirmed to fit all models of the 2024 Audi Q5 including the plug-in hybrid model. This hitch is custom fit and bolts to your Audi with included hardware. It is a class III hitch with a 2"…

view full answer...

Answer 5

I would be happy to make a recommendation for a trailer hitch for your 2021 Audi Q5. Between the Curt Trailer Hitch Receiver #C13331 and Draw-Tite Max-Frame Trailer Hitch Receiver #76183 I recommend the Curt #C13331 due to it allowing the rear bumper…

view full answer...

Answer 6

Hi Shawn; for your 2025 Audi Q5 PHEV I recommend the Curt Trailer Hitch Receiver #C98JR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a 750 lb max tongue weight which will be more than enough to handle your…

view full answer...

Answer 7

You may have to kick to either side of the hitch opening, but yes you could still operate the hands-free liftgate of your 2018 Audi Q5 with the Draw Tite hitch part #76183 installed. Due to how tightly this fits into the fascia opening for a hitch…

view full answer...

Answer 8

The Draw-Tite Class III Max Frame Receiver Hitch part #76183 is an excellent option for a 2020 Audi Q5. I recommend the Curt Class III Receiver Hitch because the receiver tube opening is tucked behind the rear bumper so that it is not very noticeable…

view full answer...

Answer 9

Yes, it does! The etrailer Hitch item #e94CR fits all models of the 2024 Audi Q5 including the plug-in hybrid. This hitch is custom fit and bolts to your Audi with included hardware. I really like this hitch because it mounts behind your rear bumper…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Best Trailer Hitch Receiver for Bike Rack and Trailer Towing on 2019 Audi Q5

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching