bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 5000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2007 Infiniti G35
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C98JR
In Stock
$247.73
Retail:$398.95
You Save: $151.22
Trailer Hitch
Not Confirmed to Fit

2007 Infiniti G35

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C98JR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C98JR

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Standard 2" Receiver: Works with ball mounts, bike racks, cargo carriers, and Class III gear
  • Tows up to 5,000 lbs (GTW): Handles small campers, boats, and utility trailers safely
  • Holds up to 750 lbs (TW): Supports heavy-duty racks or cargo platforms with stability
  • Bolt-On Design: Installs using included hardware—no welding or drilling required
  • Corrosion-Resistant Finish: Gloss black powder coat over base coat protects from rust
Made in USA

Features to know about

Get More Out of Every Trip: Class III Strength for Towing and Hauling

This Curt Trailer Hitch Receiver gives you the flexibility to tow and carry the gear that makes your trips better. With a 2" x 2" receiver opening, a 5,000 lbs maximum gross trailer weight rating, and a 750 lbs maximum tongue weight rating, it’s built for hauling small campers, boats, utility trailers, or for adding space with a cargo carrier or bike rack. Whether you’re headed to the lake or hauling work equipment, this hitch keeps your load secure.

Built to Last: Fully Welded Steel with Corrosion-Resistant Finish

The hitch is made from sturdy, square-tube steel that’s fully welded for strength. It’s finished with a gloss black powder coat over a protective base coat, giving it superior rust resistance even after long-term use. The durable finish helps protect against chips and corrosion so it stays looking clean under your bumper and performs reliably through all kinds of weather.

Easy Bolt-On Installation: No Welding Required

Installing this hitch is a straightforward bolt-on job that doesn’t require welding. It comes with the complete hardware kit and installation instructions you need to get it mounted securely. Precision, robotic welding ensures that everything lines up right where it should, so you can focus on getting it installed without modification.

Ready for Everyday Use: Designed for Versatile Accessory Mounting

The 2" receiver tube works with most standard hitch accessories—ball mounts, bike racks, and cargo carriers all fit without adapters. That means you can quickly switch from towing a trailer to carrying bikes or extra gear on your next trip. With its tested Class III rating and strong fitment design, this hitch is ready for whatever daily utility or weekend adventure you have planned.

Specs

Receiver Opening

  • Receiver opening: 2" x 2"

Class and Rating

  • Rating: Class III

Weight and Capacity

  • Maximum gross trailer weight: 5,000 lbs
  • Maximum tongue weight: 750 lbs

Warranty

  • Warranty: Limited lifetime warranty

13499 CURT Class 3 Trailer Hitch Receiver

Replaces C13331

Installation Details C98JR Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.9

15 reviews
Review sort icon
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Worked great and easy install with helpful video



by:

FIT PERFECT



by:

Easy to install. Made well.



by:

Hitch itself great. Wish there had been more descriptions on threading bumper cover over hitch.



by:

I was dreading putting this on thinking it was going to be difficult however it turned out It wasn’t bad at all. Fit perfectly no problems. Video was extremely helpful.



by:

Love all your products and have ordered many things. Only reason I give 4 starts is because for some reason I get called by my husband's name when everything I have ever ordered is under my name. Not even sure how you got his name to be honest. Every follow up email is "Hi Tim". I even checked past orders and it shows my name and my name is even in the email. Other than that great products!



by:

This review is as much about etrailer as it is about the hitch. The Curt hitch for the B9 Q5 is great. Easy to install with two people.

Etrailer was great to work with. I realized the original hitch I ordered was going to be a month before shipping. I replied to the etrailer order email and asked to switch to the Curt hitch. The change was confirmed and it shipped the next day. The installation videos are outstanding. Thanks etrailer!


16
16

See what our Experts say about this CURT Trailer Hitch

  • Recommended Trailer Hitch and Wiring for 2025 Audi Q5 PHEV
    Hi Shawn; for your 2025 Audi Q5 PHEV I recommend the Curt Trailer Hitch Receiver # C98JR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a 750 lb max tongue weight which will be more than enough to handle your bike rack and bikes. The hitch also features a limited lifetime warranty. For wiring we have the Tekonsha Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # 119147KIT. This splices into your existing wiring and has a 4-way...
    view full answer...
  • Do I Need to Cut or Trim the Bumper Fascia on My 2024 Audi Q5 to Install the Curt Hitch Receiver?
    Hello Mike, Yes, there will be minor trimming on your 2024 Audi Q5. If you watch the install video I attached the CURT # C98JR hitch receiver typically installs on the 2020 Audi Q5 without any fascia trimming, the 2024 model often requires minor trimming due to changes in the rear fascia design starting in 2021. These updates, especially on trims with sport styling or a lower rear valance, mean the receiver tube may not clear the fascia without a small notch cut into the lower center section....
    view full answer...
  • Does Hitch for 2025 Audi SQ5 Sportback Require Vehicle Modification
    Hey Beverly, thanks for the pictures! Yes, the Curt hitch part # C98JR that you referenced does fit your 2025 Audi SQ5 Sportback. It will require some fascia trimming but this is basically a standard step for hitch installs nowadays and it's not overly difficult or noticeable. Do you have an e-bike rack picked out already? If not, the Thule EasyFold XT # TH903202 is a great option that is easy to load/unload thanks to the ramp that comes with it and also folds up small so it stores easy as well.
    view full answer...
  • Availability Of Trailer Hitch For 2024 Audi Q5 Sportback
    Hello Jared, thanks for reaching out. Sadly, the trailer hitches for the 2024 Audi Q5 like the Curt # C98JR will not fit the sportback model. As you said, the back end is different. At this time there is no custom fit trailer hitch made for the sportback model, so if you need to carry cargo or bikes, the only option would be to do so with a roof rack and roof mounted carrier. What were you planning on using the hitch for? What kind of gear do you need to carry?
    view full answer...
  • Availability of etrailer e94CR for 2023 Audi Q5
    Hey Brian! The etrailer e94CR has been discontinued. You can use the Curt Trailer Hitch Receiver # C98JR as an alternative. This will fit your 2023 Audi Q5 and shares the same design as our etrailer hitch. The only difference is the Curt has a glassy finish instead of the matte black. What will you be using the hitch for?
    view full answer...
  • Comparing Curt C98JR And EcoHitch C98JR Trailer Hitches For A 2021 Audi SQ5
    Hello Andrew, great question. I will start by saying that with our videos, generally you can assume that the tires and suspension are stock when we are measuring the hitch clearance. Although, we do not have the tire size or suspension type noted anywhere specifically. In the case of the EcoHitch # 306-X7397 and the Curt # C98JR (13499) both will have the exact same 15" ground clearance on a 2021 Audi SQ5. The Curt has a slightly longer receiver, so it does have a slight edge as far as...
    view full answer...
  • Trailer Hitch and Wiring for 2025 Audi Q5 S-Line
    Hey Steve! Yes, the Curt Trailer Hitch # C98JR (13499) is compatible with your 2025 Audi Q5. There is no custom wiring, but you can use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will provide you with a 4-way to power your trailer's lights. Then you can upgrade to a 7-way using the # ETBC7. This comes with the adapter, wiring, and everything else required for installation. What kind of trailer are you towing?
    view full answer...
  • Looking for a Compatible Hitch for a 2022 Audi Q5
    Appreciate you reaching out Lu, Yes, Curt Trailer Hitch Receiver # C98JR is a confirmed for the 2022 Audi Q5 Sportback. This is a no drill through the frame install and comes with all the hardware needed for installation. I always advise the etrailer Anti-Rattle Hitch Collar # e38FV for anyone towing or using a hitch accessory. Install this once, swap hitch accessories as you like and it will keep your setup secure. What do you plan on using the hitch for?
    view full answer...
  • Recommended Ball Mount and Trailer Wiring Harness for a 2021 Audi SQ5 Premium Plus
    Thanks for choosing etrailer Michael, happy to help! I'd go with Curt Towing Starter Kit # C45534 to pair with # C98JR. You get the ball and shank, standard hitch pin and clip, a locking hitch pin and 2 keys, as well as a hitch receiver when you're not using the hitch. None of the manufacturer we carry have a confirmed wiring option for the 2021 SQ5. Audi vehicles use advanced lighting systems, the best option is to check with an Audi dealership for an OEM towing wiring kit designed...
    view full answer...


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Wilson B
Updated by:
Wilson B
Employee Carrie F
Updated by:
Carrie F
Employee John S
Video by:
John S
Employee Ethan H
Video by:
Ethan H
Employee Bradley B
Test Fit:
Bradley B
Employee Jesse B
Test Fit:
Jesse B
Employee Scott A
Test Fit:
Scott A
Employee Justice A
Written by:
Justice A

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.