Best Shank Recommendation for Giving Blue Ox SwayPro Weight Distribution Best Ground Clearance
Published 08/10/2018 >
Question:
I have a SwayPro WDH which I love. The one problem I have with it is is ground clearance. I have the seven hole shank that I have to run in ped position so the bottom of the shank gives me very low ground clearance. The top of the hitch head is bolted into the hole level with the horizontal member of the shank see attached picture. It appears that I could replace the seven hold shank with BXW4017, Blue Ox SwayPro Weight Distribution Shank for 2inch Hitches - 12inch Long - 2 Hole Adjustment . Can you confirm that this combination is compatible and that the hitch head would be in pretty much the same position as with the seven hole hitch? Thanks!
asked by: Ben R
Expert Reply:
The Blue Ox SwayPro Weight Distribution Shank # BXW4017 would be a great solution for you. Based on the picture you sent in you are currently using the height setting that the # BXW4017 provides so this shank would be an excellent solution.
Product Page this Question was Asked From
Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 3.5K GTW, 350 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 200 lbs
- Blue Ox
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Suspension Enhancement
- Search Results: hitch extension
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommendation to Reduce Rear Sag on 2018 Jeep JL Wrangler When Towing Trailer
- Q&A: Hitch Extender for 10,000 lb Travel Trailer Compatibility
- Video: All About the Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch
- Video: Breaking Down the Reese Weight Distribution
- Video: What to Know About the Curt Ball Mount for 2" Hitches-D-28
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 5.5K GTW, 550 lbs TW
- Shop: Reese Weight Distribution - No Shank - Trunnion Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 3.5K GTW, 350 lbs TW
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 12K GTW, 1.2K TW
- Shop: Curt Hitch Extender for 2" Hitch Receivers - 8" Long
- Shop: Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Article: How to Measure for Trailer Hitch Drop
- Shop: Trailer Hitch
- Search Results: rp65509
- Q&A: Blue Ox Sway Pro Weight Distribution Recommendation for Trailer Trailer with 4,080 GVWR
- Q&A: Is a Weight Distribution System Required for Towing a 3,000 lb Trailer
- Q&A: Recommended Weight Distribution System for a 4,000 lbs Wolf Pup Trailer
- Video: Blue Ox SwayPro Weight Distribution System Manufacturer Demo
- Video: The Low-Down on the Blue Ox SwayPro Weight Distribution w/ Sway Control
- Video: Feature Breakdown: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch
- Video: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch Spec Review
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring


