Replacement Hub Assemblies for 2004 Tracker Trailstar Trailer

Updated 08/06/2018 | Published 08/05/2018

Products Featured in This Question

Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide

(35)

$60.06

Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2

(589)

$203.30

Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2

(97)

$100.31

Replacement Trailer Hub Bearing - L44649

(2074)

$14.16

Question:

Looking for the number of the hub assembly kit for a 2004 Tracker Trailstar. Wheel Bearing number is SKFL44649+L44610 Wheel Bearing Seal SKF14832 NAT. 45255 4N Tires 530X12 5 Lug Rim

asked by: Dan

Expert Reply:

If your hub uses the # L44649 bearing (1.063 inch inner diameter) for both the inner and outer bearings, and your Tracker Trailer is equipped with 2,000 pound axles, the correct hub and drum assembly should be the Dexter # 8-257-5UC3-EZ. For an idler assembly you can use part # 8-258-5UC1-EZ. These feature the 5 on 4-1/2 inch bolt pattern that you mentioned as well.

I was not able to cross reference the seal number that you provided, so you will just want to make sure that your existing seal has the same 1.50 inch inner diameter as the grease seal for these hubs.

I have attached a couple short video demonstrations for these hub assemblies that you can also check out.

expert reply by: Chris R