How To Find Correct Bearing Kit for a Bass Tracker Trailer
Updated 07/21/2021 | Published 07/20/2021
Question:
I am assuming these are stil available, trying to get a seal and bearing part/kit numbers or my single axle boat trailer. It is a 1988 Bass Tracker boat and trailer serial number 15-050831-A. Only number I found on a silver sticker. The tire is a st175 80 d13 if needed. Thanks
asked by: Todd G
Expert Reply:
If the axle tag on the trailer does not include the axle capacity then you'll have to pull the hubs and either measure the bearings and seals or record their part numbers. The most common bearing combo is a L68149 (1.378" inner diameter) and a L44649 (1.063" inner diameter) which uses a 10-19 (inner diameter: 1.719") grease seal. This would indicate a 3,500 lb axle and in which case you'd need the Bearing Kit part # BK2-100.
I have attached a help article to assist.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: grease seal
- Search Results: 10~9 grease seal
- Search Results: fuel transfer pump
- Search Results: race l44610 trailer bearings races seals caps
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: how to return an order
- Shop: Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Video: What to Know About the Trailer Hub Assembly
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Headache Rack
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Shop: Grease Seal
- Shop: Grease Seal
- Q&A: Trailer Hub that Fit Axle Spindle that is 1-1/16 inch In Diameter for Both Bearings
- Q&A: How To Determine Bearing And Grease Seal Size For A 1987 Boat Trailer
- Q&A: Recommended Replacement Wheels and Tires for Tracker Boat Trailer
- Q&A: How to Pick out Replacement Bearings for Tracker Boat Trailer
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Search Results: 46210
- Q&A: Upgraded 26 Inch Leaf Springs For 3,500 lb Axle on Tracker Boat Trailer
- Q&A: Replacement Non E-Z Lube Hub & Drum For 3,500 lb Dexter Axle 8327812
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Search Results: wheel bearing grease
- Video: Hands-On with the etrailer Hub Bearing Kit
- Video: Set up: Longview Custom Towing Mirrors on a 2023 Chevrolet Silverado 1500
- Shop: Towing Mirrors
- Shop: Trailer Wiring
on Trailer Bearings Races Seals Caps
