Length of Replacement Lens for RVSTL60 Tail light

Question

Question:

Can you tell me what the overall length of this tail light lens is? The one I need to replace is 8.5inch long and it looks like this part but I didnt see on the description the length of your part. Thank You!

asked by: Melvin R

0

Expert Reply:

The Replacement Lens for RVSTL60 Tail light # AST60B is 8-11/16" long.

Another option we carry for a replacement lens is Replacement Tail Light Lens for RVST50 AST50B which measures 8-5/8" long.

expert reply by: Kyle S

0

Answer 1

Yes, you can use the Voyager RV Backup Camera Monitor #VOM719WP to upgrade your monitor from the WVOS541 system and it will work with your cameras. These are both WiSight systems and will work together. It only becomes an issue when you have WiSight…

view full answer...

Answer 2

Hello David, thanks for reaching out. I hate to be the bearer of bad news, but your only option here will be a new camera system. The WVOM541AP is the old generation of Voyager monitor which is now discontinued. Voyager moved to the WiSight 2.0…

view full answer...

Answer 3

LaSalle Bristol doesn't make it so that you can replace much on their cable actuated waste valves besides just the handle so you would be better off just replacing the entire valve and cable system with Valterra's Black #TC372 and Gray…

view full answer...

Answer 4

The abs cement isn't going to come loose and will require you to cut the pipe a bit further back and using a coupling #D50-2935 and more straight pipe to get back to where it originally sat for the valve. That being said, you can also just unbolt…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Length of Replacement Lens for RVSTL60 Tail light

Product Page this Question was Asked From

Continue Researching