Dimensions of Valterra Double RV Waste Valves

Question

Question:

Can you please tell me how long the valve is from where it hooks up to the black water tank to where you hook up the sewer drain hose?

asked by: Babette

0

Expert Reply:

As you can see from the accompanying photo the Double RV Waste Valves # T18 the distance from where the valve hooks up to the black water tank to where you hook up the sewer drain hose is 7-1/2".

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Valterra #T38 Double RV Waste Valve isn't travel trailer or valve brand specific. As long as the existing black water drain is 3 inches and the gray water drain is 1-1/2 inches in diameter, the Valterra #T38 would be compatible. The ABS…

view full answer...

Answer 2

The Double RV Waste Valves #T18A has a 1-1/2" spigot so you'd have to also pick up a coupling #344633001 in order to attach it to the existing pipe. Instead I recommend the Double RV Waste Valves #T18, which comes with hub fittings so you…

view full answer...

Answer 3

The differences between the three Double Waste Valves you mentioned comes down to the differences between hubs and spigots for their fittings. Hubs fit over spigots. The part #T18 has a 3 inch hub and a 3 inch spigot. The part #T18A has a 3 inch…

view full answer...

Answer 4

You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Dimensions of Valterra Double RV Waste Valves

Product Page this Question was Asked From

Continue Researching