Customers compare AP233-H248 to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at a Tandem Axle Trailer Hanger Kit for Double-Eye Springs. This leaf spring mounting kit includes 3 and 1/4 inch tall front and rear hangers, which are these components here, and 3 and 5/8 inch tall center hangers, which are located here, and it comes with all the necessary hardware. So everything that came in the box, I have laid out here on the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes there is a difference between couplers for an a-frame trailer and a straight tongue trailer. They are a very different design so if you have an a-frame trailer you'd need something like the #CA-5210-B which you can see matches the shape of…
view full answer...As long as the 29-1/2" length of the 6-Leaf Slipper Spring #e46SR you were looking at matches the current slipper springs used with your 7000lb axles then yes, they will work. You can confirm the length of your current slipper springs by jacking…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...The Lock N Roll Trailer Coupler #336VS501 that you mentioned is designed to fit a 2 inch hitch which is a standard hitch size like you mentioned. You'd need to have the matching trailer side coupler part #336TS528 installed on your trailer as…
view full answer...The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…
view full answer...For your 2005 Sierra Sport 24 foot toy hauler, you will want the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles #APUBR-9 for each axle, and then you will want the 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8"…
view full answer...The tire and wheel combos we carry are not machined balanced. You can have the tire and wheel combos balanced at a local tire shop if you wanted to. What some manufacturers will do is line up the light spot on the tire with the heavy spot on the…
view full answer...That's a pretty big tire size change but it's possible. The tire size of ST205/75-15 has an overall diameter of 27.1 inches and the diameter of the 4.80-12 will be 20.5 inches. So you'd end up with 3.3 less inches of fender clearance…
view full answer...I went and pulled a Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 from our warehouse to determine the weight capacities and found that on the sidewall it was stamped Load Range D with a 2,150 lb capacity at 65…
view full answer...The note that says that the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 shouldn't be used on wet or icy roads is a little misplaced. This is related to the painted steel wheel that it has and its slightly…
view full answer...The Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs #ASR3500S05 has a deflection of 1-3/4 inches. I've attached a photo to assist. We recommend 4 inches above the tire in most cases for fender mounting to account…
view full answer...The suspension in general on your trailer looks very worn. I would replace as much as I could on it to get it back to good working order. The problem with the equalizer cocked to one side like that can happen sometimes. It usually fixes itself when a…
view full answer...