What Grease Is Preloaded in the etrailer Easy Grease Trailer Hub AKIHUB-545-2-G-EZ-2K?
Updated 07/07/2026 | Published 07/03/2026 >
Products Featured in This Question
Question:
Hello, I just purchased two AKIHUB-545-2-G-EZ-2K for my Jon boat trailer. I just am trying to verify what type of grease is already in it so I can avoid mixing incompatible types of grease. Will regular marine grease work or is lithium grease in there? Any advice on what type to use and/or avoid would be appreciated.
asked by: Bob R
Expert Reply:
Hi Bob,
The hubs part # AKIHUB-545-2-G-EZ-2K come pre-greased with a lithium based grease, so when it's time to add or replace grease, I'd stick with another lithium based high temperature #2 wheel bearing grease like the Dexter High Temperature Lithium Grease, part # DX37VC. You're asking a really good question because not all greases are compatible. Mixing different types can cause them to break down, which means they won't protect the bearings as well and can lead to extra wear over time.
The good news is you won't need to add any grease right away since the hubs are already packed at the factory. As a general rule, it's a good idea to inspect and repack your wheel bearings every 12 months or 12,000 miles, whichever comes first. If you ever do add grease through the EZ Grease fitting, go slowly and only use what you need. Putting in too much grease can create enough pressure to damage the rear grease seal, and that's one of the most common reasons seals fail.
Out of curiosity, where do you usually launch your Jon boat, lakes, rivers, or coastal spots?
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What's the Date Code on Kenda Tires
- Shop: Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races
- Search Results: bearing grease
- Search Results: 175 80r13
- Search Results: l44649
- Search Results: ez lube grease cap trailer bearings races seals caps
- Search Results: spare tire mount
- Search Results: license plates and frames
- Search Results: 175/80r13
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Kenda Karrier KR53 ST175/80R13 Radial Trailer Tire with 13" Silver Mod Wheel - 5 on 4-1/2
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Shop: Dexter Multipurpose High Temperature Lithium Grease - 1 lb
- Shop: Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer - Black
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Q&A: Looking For Hub Assembly With Bearings For Dexter 4,400 lb Axle
- Video: Breaking Down the Specialty Recreation Replacement Slide Out Skis
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison



