Is Trailer Hitch Rated for Weight Distribution Available for 2017 Kia Sorento?

Updated 06/12/2018 | Published 06/11/2018

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(601)

$227.36

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(342)

$221.82

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1372)

$92.75

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(252)

$78.44

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(808)

$80.34

Question:

It says in your add that this hitch is not rated for load leveling hitches. How then do I pull my 3000 pound camper with load leveling hitch?

asked by: Don

Expert Reply:

There are two hitches that are a fit for your 2017 Kia Sorento though neither the Draw-Tite # 75908 or Curt # C13195 are rated for use with a weight distribution (load-leveling) system so you would be unable to use this to tow your 3,000 lb camper.

I looked up your '17 Sorento's owner's manual and it does state that the maximum towing capacity for this vehicle is 3,500 lbs (for the Theta II 2.0/2.4 engine) or 5,000 lbs (for the Lambda II 3.3 engine) only if you have the trailer towing package, which you will want to keep in mind. For trailer wiring to add a 4-flat, if you have the factory tow package you need Wiring Harness # C56332 or Wiring Harness # C56256 if you do NOT have the factory tow package.

I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.