Replacement Hardware for Curt Replacement Weight Distribution Head # C17307

Question

Question:

Hi i have a 16 ram 2500 i was woundering how much more is this part with the mounting bolts and will it fit this bar

asked by: Shawn L

0

Expert Reply:

The mounting hardware for the Curt Replacement Weight Distribution Head # C17307 is found as part # C17350 on our site. This weight distribution head will fit your shank as long as the portion that it mounts to is no wider than 2" and has mounting holes that are 1-1/4" apart on center.

expert reply by: Jon G

0

click to enlarge

Answer 1

In terms of compatibility, it depends on which components of a weight distribution system you are referring to. For example, Curt spring bars will not fit in a Reese head nor will Reese bars fit in a Curt head. But, if you are talking about the…

view full answer...

Answer 2

I do have an option for you but the Curt Bolt Kit for Trunnion Style Weight Distribution Hitch part #C17350 does not come with the spring bar retainer clips that you are referring to. Unfortunately, these retainers clips are not sold separately as…

view full answer...

Answer 3

Yes the Curt weight distribution head part #C17307 is compatible with the shank part #EQ90-02-4600 that you also referenced. These two parts together would give you a really long ball mount setup with an adjustable height. You'd also need the…

view full answer...

Answer 4

The only way to get the replacement Curt WD head assembly bolts would be to get the Curt Bolt kit part #C17350 that also includes several other bolts and hardware.

view full answer...

Answer 5

Mounting hardware for the Replacement Head for Curt TruTrack Weight Distribution System w/ Sway Control #C17506 is not included. Since it's a replacement part you'd want to reuse the hardware that came from the old head.

view full answer...

Answer 6

The Curt Bolt Kit for Trunnion Style Weight Distribution Hitch, #C17350, will be the hardware kit that you will need for the Curt Replacement Weight Distribution Head for Trunnion Style Bars, #C17307.

view full answer...

Answer 7

The parts in question are conical tooth washers. On the Curt weight distribution systems they go between the nuts and the head using the bolts that hold the head to the shank. I have included a picture that points them out for you. The tooth side…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Hardware for Curt Replacement Weight Distribution Head # C17307

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching