Recommended Trailer Hitch For Trailmanor to Carry 3-Bike Rack
Updated 06/04/2018 | Published 06/01/2018 >
Products Featured in This Question
Question:
I have a 2007 Trailmanor 2720SL that I would like to add a rear receiver hitch for the purpose of carrying 3 mountain/cruiser bikes. The frame measures 52inch wide on center so the C13702 will not work unless there is a way to cheat another 1. The C13703 hangs lower and weighs about 50 pounds more. Are there other low profile hitch options for a 52inch wide frame? I considered a ball mount bike rack, but the tongue weight is already near the max I can handle. An A frame mount is not practical due to the telescoping nature of a Trailmanor when it opens up, What is your recommendation for hauling bikes on the Trailmanor?
asked by: David
Helpful Expert Reply:
The best option to add a trailer hitch to your 2007 Trailmanor 2720SL with a is either the Curt # 13703, which works on box frames, C-channel frames, or I-beam frames.
There is also the Ultra-Fab # UF35-946403 which welds onto I-beam, C-channel or rectangular trailer frames, but note that a gusset may be needed to weld onto I-beam frames and a plate may be needed to weld onto a C-channel frame, which is why the Curt is a better option overall.
In terms of a bike rack, there is a 3-bike rack available, the Swagman # S64152-2, though it does have a 35 lbs per bike weight limit. There are no 3- or 4-bike racks which can hold more than 35 lbs so if your cruiser or mountain bikes weigh more than that the only option would be a 2-bike rack, the Kuat Transfer V2 Bike Rack for 2 Bikes Item # KU84FR, which has a 60 lb per bike weight capacity but is a wheel mount so would NOT work if your bikes have fenders.
Additionally, please note that when using a hanging rack like the Swagman # S64152-2 you'll need bike frame adapter bar # 64005 if your bike is dual-suspension, has a step-through frame or you want to carry a small children's bike. The bar will give those bikes a horizontal mounting point so they can be carried by the rack. Also, using the Curt # 13703 hitch is going to require the use of stabilizing strap # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty.
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 350 lbs TW
- 3500 lbs GTW
- 18 - 30 Inch Wide Frames
- 31 - 45 Inch Wide Frames
- 46 - 60 Inch Wide Frames
- 61 - 75 Inch Wide Frames
- Towing and Cargo
- Bolt-On
- Weld-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: lippert 285318
- Search Results: propane quick connect
- Search Results: propane cover
- Search Results: rv leveling blocks
- Video: Hands-On with the Lippert Electric Trailer Jack with Footplate
- Video: Installation of the etrailer 7-Way RV Style Connector with Molded Cable
- Q&A: Troubleshooting Trailer Jack that Has Power but Doesn't Work
- Q&A: How to Wire Lippert Electric Trailer Jack During Installation
- Shop: Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Shop: etrailer 7-Way RV Style Connector with Molded Cable - Trailer End - 6' Long - RV Standard
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 3,500 lbs
- Shop: Kuat DEK Platform Rack - Fixed Mounting Points - 47" wide 66" long
- Shop: Roof Rack
- Video: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide: The Breakdown
- Video: Curt Adjustable Width RV Trailer Hitch Installation - 2016 Keystone Hideout Travel Trailer
- Video: Curt Adjustable Width RV Trailer Hitch Installation - 2017 Forest River Rockwood Mini Lite Travel Tr
- Shop: Quick Roof Repair Tape for RV Roofs - 25' Long x 4" Wide - White
- Q&A: Will Rhino-Rack Backbone Fit 2023 Nissan Armada
- Shop: Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
- Q&A: Lippert Power Jack # LC285318 LED Lights Blinking and Jack Does Not Work
- Q&A: Troubleshooting Lippert Power Tongue Jack that Wants to Stop After 10 Seconds of Operation
- Q&A: Electric A-Frame Trailer Jack Only has Intermittent Power
- Q&A: Troubleshooting Powered Trailer Jack that Has Power But Won't Work


