Replacement Gearbox for Venture VMC940RB-135558 on Trailer Landing Gear

Question

Question:

Looking for a replacement for venture vmc940rb-135558.

asked by: Jerem

0

Expert Reply:

To replace the Venture VMC940RB-135558 gearbox on your trailer's landing gear system, you will just need the Replacement Gearbox # LC276602. This gearbox features a corrosion resistant aluminum construction and will perfectly replace your system's existing gearbox.

I have attached a short video demonstration on this gearbox that you can also check out.

expert reply by: Chris R

0

click to enlarge

Answer 1

The correct replacement for a Venture M-9000 PK Landing Gear Motor is the Lippert Venture 5th Wheel RV Landing Gear Motor part #LC142178 or you can upgrade to the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor part #LC196308 which has a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 7

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 8

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Welcome back Anthony! The Curt parts you were looking at are compatible with your Silverado and each other but I recommend the B&W Companion OEM 5th Wheel Hitch w/ Slider item #BWRVK3775. The B&W Companion w/ Slider item #BWRVK3775 is one of…

view full answer...

Answer 11

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 12

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Replacement Gearbox for Venture VMC940RB-135558 on Trailer Landing Gear

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching