Availability of 10 inch Brake Assemblies with 4.4k Capacity by Dexter

Question

Question:

I have 2012 trailer Acadia to Forest river and I am look for a dexter brand brake kit 4.4k 10x21/4. Can not find this model. Does he still exist. Tank you

asked by: Yves T

0

Expert Reply:

We do have the Dexter 10 inch brake assemblies you are looking for. For that the part # K23-478-479 would be what you'd want. This is a 10 inch Dexter brake assembly pair with a 4.4k capacity just like what you need. This comes with an assembly for either side of the trailer.

expert reply by: Jameson C

0

Answer 1

Hi Trip; it looks like you ended up replacing the pair with #K23-478-479 which was the right choice. Unfortunately, brands don't cross over with these 4,400 lb axles so Lippert isn't an option. The price is comparable for the pair of Lippert…

view full answer...

Answer 2

We have exactly what you are looking for! Since your 2013 Forest River XLR 27HFS toy hauler has a 4400lb axle instead of a 3500lb axle you would not want to go with 3500lb braking assemblies. The reason for this is the strength of the magnet will be…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Availability of 10 inch Brake Assemblies with 4.4k Capacity by Dexter

Product Page this Question was Asked From

Continue Researching