Does Installing Curt Trailer Hitch # 13013 Require Removing Rear Bumper

Question

Question:

okay i was wondering do you have to take the bumper off to put the hitch on?

asked by: Branson

0

Expert Reply:

I checked the install instructions for the Curt Hitch part # 13013 and you have to unbolt the bumper brackets and remove the bumper.

expert reply by: Jameson C

0

click to enlarge

Hector

5/24/2020

I'm looking for a hitch for my 1995 Toyota Tacoma 4x4. What do you recommend?

Chris R.

5/26/2020

For your 1995 4WD Tacoma I highly recommend the Curt # 13013. It features a 5,000 pound towing capacity and allows for a no-drill installation.

Johnny O.

7/2/2020

I have a 2000 Tacoma and want to install a trailer hitch with wiring and no welding, What would you recommend please?

Chris R.

7/7/2020

For your 2000 Tacoma the Curt Class III Trailer Hitch # 13013 will work perfectly. It will bolt right onto the truck's frame rails using existing holes - no drilling or welding required. Then for a wiring harness I recommend the Tekonsha T-One # 118379, which will just plug in behind the tail lights.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 6

If the bike rack initially comes with a threaded hitch pin like the Malone #MPG2149 or the Curt #C18085 then a locking hitch pin like part #C23519 that you referenced won't actually fit. I do have some alternatives though that you can check out.…

view full answer...

Answer 7

Hi Bernadette! I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 2" #C64DR for your 2026 Toyota Corolla Cross Hybrid SE AWD. It's American made and can handle up to 200 pounds of tongue weight and 2,000 pounds of towing…

view full answer...

Answer 8

Hi Mary, There can be differences in the way components under the vehicle are ran that can change how a trailer hitch will need to be shaped to fit depending on the model type. I spoke with EcoHitch and they stated that they haven't tested the…

view full answer...

Answer 9

Hey, Wilson! Thanks for your question. Yes, the Curt custom hitch part #C64DR will fit your 2026 Toyota Corolla Cross hybrid model. Even though it is a custom hitch, you will have to temporarily remove the bumper/fascia to complete the installation.…

view full answer...

Answer 10

Hi Betsy; I believe that is the Toyota part number PT228-16221. Assuming that is correct, it looks like the installation instructions show the hitch installing in the same location. You won't be able to install them together but you can remove…

view full answer...

Answer 11

Hey Curt, we have a 2 inch hitch that fits your 2026 Toyota Corolla Cross non-hybrid with the part #C64DR but we don't have any EcoHitch fits at this time for the non-hybrid models. Are you planning on doing some towing?

view full answer...

Answer 12

Hey Lisa, yes you can use a hitch reducer with the EcoHitch part #EH87CR to reduce it down to a 1-1/4 inch hitch size like with the part #HT02. Do you have a bike rack for that hitch size currently?

view full answer...

Does Installing Curt Trailer Hitch # 13013 Require Removing Rear Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching