bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. 2000 lbs GTW
  5. Concealed Cross Tube
  6. 200 lbs TW
THIS ITEM IS NOT A FIT FOR
2015 Audi A3
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class I - 2"

Part Number: C64DR
In Stock
$224.93
Retail:$355.95
You Save: $131.02
Trailer Hitch
Not Confirmed to Fit

2015 Audi A3

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 2" part number C64DR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C64DR

  • 2 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • CURT
  • For Towing

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Installation instructions included
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11637 Curt Class 1 Trailer Hitch Receiver

Installation Details C64DR Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling through vehicle frame required for installation , Requires temporary removal of bumper/fascia during installation , Fascia trimming required for installation , Installation requires permanent removal of the impact structure; hitch replaces the impact structure for support and safety



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

5.0

14 reviews
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2024 Toyota Corolla Cross

I had my nephew help me, but we did it in about an hour and 15 minutes

Nick S. profile picture
Etrailer Expert

Nick S.

9/29/2025

We love to hear that! It looks nice on the vehicle too. What are you planning on using the hitch for?



by:

Perfect fit, got the hitch installed as part of a bump up repair, reinforcing bar was going to cost me over $190, the hitch bolted right in so I got the hitch for almost nothing. Body shop said it was a direct fit with no mods required to car. Beautiful!



by:

I just installed the hitch today. The hitch installed easily once the bumper was removed. The most difficult portion was getting the moulding off the fenders and getting the tail lights out. I am happy with the fit and finish overall.



by:

High quality hitch, arrived in 2 business days, 3 hours to install, used the YouTube video by U-Haul.



by:
2010 Toyota Corolla

We installed this hitch on my wife’s brand new Corolla Cross Hybrid SE. With an installation difficulty rating of 10 out of 10, we knew we had to take our time. It ended up taking us almost 4 hours instead of 2, but we also installed the wiring harness for the trailer while we had the bumper cover off. We also took the time to test all of the car and trailer lights before putting everything back together. The step-by-step installation instructions are great. Everything went very smoothly.



by:

Got here in less than 48 hours- fit per fect



by:

Fits perfectly. Installation was easy. Great buy!



by:



by:
2022 Toyota Corolla Cross

It was easy to install,11/2 hr.



by:



by:



by:



by:



by:


14
14

See what our Experts say about this CURT Trailer Hitch

  • Can The 24x60 Cargo Carrier Be Used On A 2025 Toyota Corolla Cross?
    Hi Emmanuel! As long as you have a 2" hitch on your 2025 Toyota Corolla Cross, you can absolutely use the 24x60 etrailer Cargo Carrier # e98874. If you do not have a hitch yet, I recommend grabbing the Curt Trailer Hitch Receiver - Custom Fit - Class I - 2" # C64DR. We technically have one that is rated higher, but your vehicle is only rated to 150 pounds of tongue weight, so it doesn't make sense to go with the more expensive option when this Curt will still max out your vehicle's capacities. I...
    view full answer...
  • Looking For Trailer Hitch For 2024 Toyota Corolla Cross Hybrid AWD
    Hello Marge, thanks for reaching out. We do offer a 2" hitch option for the 2024 Toyota Corolla Cross Hybrid AWD. For that I recommend the Draw-Tite Class 3 Hitch # DT28GR. We have confirmed this will fit the Hybrid AWD models
    view full answer...
  • Recommended Hitch for a 2024 Toyota Corolla Cross
    I do not have any information on the factory hitch for the 2024 Toyota Corolla Cross John so I can not speak to the discrepancies on the torque specs. What I can tell you is that both the Draw-Tite item # DT28GR and Curt item # C64DR hitches have been tested by their respective manufacturer's and been installed on Toyota Cross's since the 2022 model year. They each have been designed to have a 2,000 lbs capacity but you are limited to the 1,500 lbs one that Toyota states the 2024 Cross...
    view full answer...
  • Does Curt Hitch for 2024 Toyota Corolla Cross Include Wiring
    Hello Salvador; the Curt # C64DR for your 2024 Corolla Cross does not include wiring. You will need the # TK25VR if you have incandescent taillights or the # C55ZV if you have LED taillights. Hola Salvador; El Curt # C64DR para tu Corolla Cross 2024 no incluye cableado. Necesitará el # TK25VR si tiene luces traseras incandescentes o el # C55ZV si tiene luces traseras LED.
    view full answer...
  • Trailer Hitch Receiver and 4-Way Flat Vehicle Wiring Harness For a 2024 Toyota Corolla Cross
    Yes, the Curt Trailer Hitch Receiver # C64DR is confirmed to fit your 2024 Toyota Corolla Cross. This is custom fit so you will not have to drill into your vehicle frame to install the hitch. I recommend installing the Curt Vehicle Wiring Harness # C39DR when you install the receiver. This will give you a 4-way flat connector which will allow you to attach to the wiring on most small trailers. It will also allow for Auxiliary Lighting # C53201 if you are using a hitch mounted accessory.
    view full answer...
  • Weight of Curt and Draw-Tite Hitches for a 2022 Toyota Corolla Cross
    The Curt Trailer Hitch Receiver # C64DR weighs in at about 25 lbs while the Draw-Tite Max-Frame Trailer Hitch Receiver # DT28GR weighs in at about 26 lbs so they are basically identical for your 2022 Toyota Corolla Cross. The only difference between the two is that the Draw-Tite is rated as a Class III so the tongue weight is 300 lbs instead of 200 lbs like the Curt Class I hitch. I typically recommend going with the higher tongue weight but it looks like your Corolla Cross is only rated...
    view full answer...
  • Does Curt Trailer Hitch C64DR Fit 2023 Toyota Corolla Cross Hybrid?
    Yep! The Curt Trailer Hitch # C64DR is confirmed to fit all models of the 2023 Toyota Corolla Cross including your Hybrid model. I went ahead and linked the written instructions for this hitch below for you to check out.
    view full answer...
  • Correct Curt Trailer Hitch Fit for a 2022 Toyota Corolla Cross
    The correct Curt Trailer Hitch Receiver for a 2022 Toyota Corolla Cross is the part # C64DR which offers a direct bolt-on fit. It has a 1-1/4" opening which can be used for towing or hitch mounted accessories like bike racks and cargo carriers. That said, if you will be towing you'll need to pickup the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C39DR and Curt Towing Starter Kit for 1-1/4" Hitches part # C45147. If you're just using the hitch for a...
    view full answer...
  • Is it Safe to Replace Crash Bar with Curt Hitch on 2023 Toyota Corolla Cross
    Yes, the Curt Trailer Hitch Receiver part # C64DR which is a fit for a 2023 Toyota Corolla Cross will replace the rear impact structure. It's actually stronger than the rear impact structure which will lead to less damage in the event of an accident. That said, impact structures are designed to crumple in an accident so having a more solid structure back there can have other affects which you can research more online.
    view full answer...
  • Mostly Hidden Hitch that Fits 2025 Toyota Corolla Cross
    Hey Joshua, the EcoHitch # EH87CR that you referenced only does fit the hybrid versions of the 2025 Toyota Corolla Cross so it's not going to work for you but we do have the very similar Curt hitch part # C64DR that will work great. It does not have a stainless hitch opening like the EcoHitch though.
    view full answer...
  • Does Curt Hitch for 2024 Toyota Corolla Cross also Fit Hybrid Models
    Yes, the Curt Trailer Hitch # C64DR is confirmed to fit all models of the 2023 Toyota Corolla Cross including your Hybrid model.
    view full answer...
  • Trailer Hitch Receiver For 2024 Toyota Corolla Cross
    Indeed there is a trailer hitch receiver fit for the 2024 Toyota Corolla Cross. I was able to verify this directly with the manufacturer for you, with the correct part number being the following: - Curt Trailer Hitch Receiver # C64DR
    view full answer...
  • Is 2" Curt Hitch for 2022 Toyota Corolla Cross Rated as a Class I Receiver
    The Curt Trailer Hitch Receiver # C64DR for your 2022 Toyota Corolla Cross truly is a Class I hitch with a 2" receiver like you see on the product page. You are correct that Class I hitches typically have a 1-1/4" receiver but it looks like Curt wanted to turn some heads with this hitch design. As long as you remain within the weight rating of your Corolla Cross and/or the hitch (whichever is lower) you'll be good to go!
    view full answer...
  • Parts Needed For Adding a 7-Way Trailer Connector To a 2023 Toyota Corolla Cross Hybrid
    First you will want to start with the Curt T-Connector Vehicle Wiring Harness # C39DR to connect to the tail lights on your 2023 Toyota Corolla Cross Hybrid. This will then connect to the 7-Way # ETBC7L. The 7-way includes the wiring needed to connect to the 12v vehicle battery. This is how the on board brake controller on your tear drop trailer will get its power. I recommend using the Mounting Bracket # C58000 to secure the 7-way and 4-way connectors to the Curt Trailer Hitch Receiver...
    view full answer...
  • How Much Does the Curt Hitch for a 2023 Toyota Corolla Cross Weigh?
    The Curt Trailer Hitch item # C64DR weighs 28 lbs. This hitch is custom fit and bolts to your 2023 Toyota Corolla Cross with included hardware. This is a class I hitch with a 2" receiver. If you are planning on towing you will also need a wiring harness item # C39DR and a ball mount kit item # C45534.
    view full answer...
  • Trailer Hitch Receiver For Carrying a Bike Rack With a 2023 Toyota Corolla Cross
    Yes, we have the Curt Trailer Hitch Receiver # C64DR which is confirmed to fit your 2023 Toyota Corolla Cross. This is a class I receiver with a 2" opening. You will want to use a bike rack like the Thule EasyFold XT # TH903202 as it will fit in the 2" opening and is rated for use on a class I receiver. The carrier weighs 45lbs and is capable of carrying 2 bikes up to 65lbs each. It secures the bike by the frame and has wheel straps to hold the wheels in place.
    view full answer...
  • Who Installs Curt Trailer Hitches on 2024 Toyota Corolla Cross Hybrid
    To find who could install the Curt # C64DR on your 2024 Corolla Cross Hybrid you can use our dealer locator. I have attached a link below which shows everyone in our dealer network who could install the hitch for you. You will need to change the zip code since I have it set to 63385. If you're near Wentzville, MO we would be happy to install the hitch at our location off Highway A.
    view full answer...
  • Trailer Hitch Receiver Fit For 2022 Toyota Corolla Cross
    There is indeed a trailer hitch receiver that fits your 2022 Toyota Corolla Cross, from Curt: - Curt Trailer Hitch Receiver # C64DR The # C64DR has a completely hidden crosstube so only the receiver is showing, helping your Toyota keep its clean aesthetic. The receiver is also a 2 inch receiver, which is great because it allows you many more options for accessories like bike racks when compared to a smaller, 1-1/4 inch receiver.
    view full answer...
  • Does Curt Hitch C64DR Fit AWD Model of 2022 Toyota Corolla Cross
    Yes, the Curt hitch part # C64DR that you referenced does fit the all wheel drive models of the 2022 Toyota Corolla Cross.
    view full answer...
  • Trailer Hitch And Bike Rack Recommendation For A 2024 Toyota Corolla Cross
    Hello Amy, congrats on the new Corolla! We do offer a trailer hitch for your 2024 Toyota Corolla Cross, the Curt Class 1 Hitch # C64DR. This hitch has a 2" receiver which is the standard size. We do also offer the Saris bike racks. The Saris Freedom # SA4412B is a great option for carrying two bikes weighing up to 35 lbs apiece. Were you looking for a specific Saris rack? The 2" hitch will allow for several options so if you need something specific just comment below and let me know.
    view full answer...
  • Installation Times for Trailer Hitch and Wiring on a 2022 Toyota Corolla Cross
    For the Curt Trailer Hitch Receiver # C64DR you're looking at about 2 hours while the Curt Powered Tail Light Converter # C59236 is going to be at least an hour. These are the approximate installation times the manufacturers have given but it can vary depending on the skill level and tools available for the installer. If you plan on doing this yourself I would plan on it taking a good chunk of a Saturday (or whatever day is your day off work) to get it all installed on your 2022 Toyota...
    view full answer...
  • Do You Use Factory Or Included Hardware For Installing Curt Trailer Hitch C64DR On '23 Corolla Cross
    It sounds like you have the 2023 Toyota Corolla Cross which uses the Curt hitch # C64DR. This hitch mounts to the frame behind the bumper, but you remove the factory bumper support and it does not get reinstalled like it sounds like you're trying to do. You will also use the new mounting hardware, and torque them to the specs shown in the instructions. If you do not have your instruction manual I've went ahead and linked the online version below for you to check out.
    view full answer...
  • Curt Trailer Hitch Receiver For 2023 Toyota Corolla Cross
    There is a Curt trailer hitch that fits your 2023 Toyota Corolla Cross, which is the following part number: - Curt Trailer Hitch Receiver # C64DR
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Thomas T
Video by:
Thomas T
Employee Justice A
Written by:
Justice A
Employee Ian F
Test Fit:
Ian F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<