Will the Fulton Trailer Fender # F008554 Work on a Master Tow Dolly Model 80THD

Question

Question:

Can the Fulton Fender F008554 be easily mounted on a Master Tow Dolly Model 80THD to replace the Polyethylene Fenders on the dolly? Thanks

asked by: Carl

0

Expert Reply:

I checked out the master tow dolly 80THD online and it looks like the Fulton Plastic Fender, item # F008554, will mount to the brackets on the tow dolly, as long as the wheels on the tow dolly are no larger than 14 inches. The original equipment size for the master tow 80THD is 14 inches.

Some modification of the brackets for mounting the fenders may be required, and the 80THD has lights mounted to the fenders, which will need to be transferred to the new fenders. Modification for attachment of the lights will be needed.

expert reply by: Robert G

0

Answer 1

The closest match we have is the part #HP79VR. This fender is 7-3/4" Wide x 28" long x 10" tall and has a back.

view full answer...

Answer 2

I checked out the master tow dolly 70LP online and it looks like the Fulton Plastic Fender, item #F008554, will mount to the brackets on the tow dolly, as long as the wheels on the tow dolly are no larger than 14 inches. The original equipment size…

view full answer...

Answer 3

For your Roadmaster Tow Dolly part RM3477 we have metal fenders. You would want the part #RM-922004 for the driver side and part #RM-922005 for the passenger side.

view full answer...

Answer 4

The Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Passenger Side item #DM97FR you referenced and the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Driver Side item #DM37FR can be modified to fit your 1999 Master Tow…

view full answer...

Answer 5

You will want to look at the dimensions of the plastic fenders, #F008584-2, to determine fit on your tow dolly. I have included some pictures showing the relevant measurements for you. The fenders are designed for 14 inch wheels and tires so they are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Will the Fulton Trailer Fender # F008554 Work on a Master Tow Dolly Model 80THD

Continue Researching