Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7-3/4" Wide x 28" long x 10" tall. This sturdy, rounded fender has a durable backing plate that helps protect your trailer from debris. 16-Gauge ribbed steel is built to last. Bolt or weld onto your trailer.
Features:
Specs:
Note: Do not use the backing plate to mount the fender to your trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everybody. I'm Ellen here at etrailer.com and we're going to be taking a quick look at the single axle trailer fender with backing plate. It's always a good idea to have fenders on your trailer to make sure that there's no debris that's going to get kicked up and strike against whatever you're hauling, especially if it's an open trailer or open utility trailer. Even if not though, it's also going to protect other drivers from any of that debris from causing any damage to their vehicles as well. It just kind of helps keep that road debris back down on the road.This is made out of a sturdy steel construction. It is just cold rolled steel.
You'll want to prime and paint this to match the finish of your trailer. But let's take a closer look and make sure that this is the right fit for you. I'll give you some measurements for reference. Now, again, it is going to be a ribbed steel. You can see that rib design there on the side.
As far as the total width, from bottom edge to bottom edge, it's about 28" long. And then the height might take measure to work here is about 10" tall, really more like 9-1/2", I'd say. And then the width is about 7-3/4".Now it does weigh about six pounds. You can weld this on or bolt it on, although you want to keep in mind that you don't want to attach it using just the backing plate. It's not really designed for that.
You'll want to go along the actual edge of the fender. That would be this lip right here to make sure that it gets on there nice and sturdily or securely. If you want to get any kind of mounting brackets, they are sold separately for a bolt on application. It is just a single fender. You can use this on the driver or passenger side, and it works for 13" up to 14" diameter wheels.That's pretty much all there is to it for our quick look at the single axle trailer fender with backing plate.
I hope that this has been helpful in deciding if this is the right one for you. We do have a lot of options available here at etrailer.com and all kinds of accessories in general for your trailers RVs and more. So be sure to check those out right here at etrailer. And thanks for watching..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Exactly what I ordered, backing plates already welded to the fender, great product at a good price
Perfect replacement for the fenders on my utility trailer
I put these fenders on my Utility trailer for my ATV.
They were the same size so they fit very well.
Vwery happy with them, good product for the cost.
Was very impressed with the fenders I order the exact size I needed will continue buying from etrailer
Great experience. The shipping, the price, the delivery and the shopping for the part was very easy
Fast delivery, great price, product is just as advertised. This is my 3rd order from etrailer and would not hesitate to use them again.
These fenders fit perfectly and looked great as well. Installation is a breeze whether you bolt or weld them on.
Always have what is needed to finish the trailer rebuild, no back orders and the shipping is lightning fast
Was told order would arrive last Friday. It partially did. Called and was told other fender would be shipped out of another location and would arrive by Tuesday. The first one came smooth, the second ribbed. Need this resolved so I have a match.
Fast service and well made fenders
Everett
9/9/2023
I built a trailer for my Jon boat, and the fenders were good made and worked well
Chris R.
11/2/2023
Wheels, tires and fenders look great on our camp trailer. Excellent communication, tracking and everything arrived in great condition. Highly recommend!
Really like the product well build and strong. Received it with no damage and received it quickly.
DON'T DO IT! Spend a little more on the galvanized version! I had mine stored outside (under roof), but the humidity still got to them and they have tons of surface rust.
Jenny N.
12/26/2023
A galvanized version will give you corrosion resistance for sure. We have a stainless steel fender that will fit with a 14 inch wheel part # HP98VR. Keep in mind that fenders like this one part # HP97FR are meant to be primed, then painted for corrosion protection and to match your trailers finish.
Fit perfect.Welded up very good !These folks are the best.
Great customer service
Great product. Well built.
Fast service, great communication..great price.
Perfect for my small trailer
Worked perfectly on my tow dolly. Thank you!
Can’t believe customer service still exists like these guys. Order shipped same day as ordered. Delivered in 4 days. Items ordered exactly as I wanted and packaged well. I’m impressed. Cant put pictures right now, fenders are being mounted on trailer.
Fenders & wheels are perfect. They look great on my luggage trailer.
Great product. Better quality than I thought I was getting. Well made. I recommend buy ingredients it. Fast order picking and shipping. I ordered it after 5 pm and it was delivered next day. Awesome
Worked well on our trailer.
Looks great now, was easy to install
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
10/9/2023
I will have our customer service team reach out to you! If you can, are you able to tell me what part number is on the odd fender?