Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a durable backing plate that helps protect your trailer from debris. Ribbed, 16-gauge steel is built to last. Bolt or weld onto your trailer.
Features:
Specs:
Note: Do not use the backing plate to mount the fender to your trailer.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
The fenders are what I expected. Ordered 4 for our duel axle car carrier.
Ribbed 16 ga. will be stronger than single long fender on each side and less expensive. Wish interior panel was heaver 10 ga material; easier, more ridge, to bolt to trailer frame; add $5.00 to cost OK. No photos yet. Just arrived.
I’m very satisfied with the overall outcome of ordering my trailer fenders from the online order process to there timely delivery. Of most importance was the quality of the fenders. They were made of heavy gauge sturdy steel. I’ve been closed some photos showing the final product after painting. I would definitely order again if necessary. Thanks trailer.
Received 2 fenders just as described, well constructed, only spot welded in seven spots, could use a little more tacking. I will add additional spots.
Overall, well constructed of good material. Would buy again. Delivered 2 days earlier than noted.
I recently ordered a new set of fenders and mounting brackets for my boat trailer. The fenders are very sturdy and the brackets are 1/4 in steel and quite rugged. This equipment is much stronger than original. I wasn't quite sure of sizes to order, but Cody O. was helpful and patient and walked me through the entire order. I am a happy camper.
The fenders on my 8 ft X12 ft , 29 year old utility trailer had rusted to the point that there were big holes in them. They were welded the trlr sides and to the 2 foot steps located in front of, and behind each tire. It took about 1 hour to cut and grind the old fenders out and off. About 1 hour to fit in and weld the new fenders in place. An excellent fit. It is 12 degrees below zero here today, so I won't be priming, painting, and undercoating the fenders for a couple of months. Very strong fenders and I think an excellent value.
Arrived on delivery date when opened found 1 fender with the tac welds bad other than that they look good
Other than fenders being out of stock at the time, (which didn't matter as I could not put the fenders at the time I ordered them), I received the fenders in great shape. I welded the fenders on to the trailer and have towed the trailer approximately 4500 miles with no trouble. The fenders are very sturdy and well made. etrailer will get my business again. The sales people were very helpful and kept me informed as to when the fenders would be delivered. I would like to send a picture, but as of now I am in Florida until April and the trailer is in Missouri. Thanks a lot.
I wish there were more information on mounting options. I welded them in place but again, more info would have helped.
My dolly came with plastic fenders. A friend helped me maneuver the dolly and pushed on the plastic fender and broke it in two places. A tire blow out demolished the other fender. I purchased two of these fenders. They are made of a heavy steel and I am sure they will not need a replacement in the foreseeable future. Thank you for a prompt delivery.
Excellent, does what it should just wish my tailgate cleared it. (not the fault of the product just the buyer)
April,10 2025
Great Job! In todays Technology driven society with legal scamming and unprofessional customer relations running rampant it is a breath of fresh air to deal with an authentic and professionally managed business.I ordered the parts a day ago and recieved them before lunch the next day.Kudos E-Trailer! Stay impeccable!
The item arrived without issue earlier than expected. The item was exactly as described (sometimes can be difficult to select the proper item without physically seeing it). The description was detailed and accurate. The item was of high quality and craftsmanship. I would certainly shop here again.
Michael G.
6/14/2025
Following 1 year of purchase, I am still very happy with this product. The original and very helpful description of the product, and the quality of products provided by etrailer not only guided my initial decision to purchase, but has also sustained my satisfaction 1 year later, proving overall that it was the correct purchase.Thank you etrailer.
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
Jo
12/31/2023
They are still holding up well.
Backing plate is thinner gauge than the fender and only spot welded in 5 places. On one of the fenders one spot weld was already broken. Not a deal breaker as I kind of expected this. Just know that steps will have to be taken to reinforce the attachment of the backing plate to the fender, I will use rivets. Shipping was VERY fast and customer service is top notch. I will patronize etrailer in the future.
Horace C.
7/8/2023
I used these fenders on a tow dolly. I had to reinforce the backing plate to fender welds. Otherwise, fenders worked very well. I wouldnt attach the unit using the backing plate without strengthening.
high quality fender that I really appre ciate.
GOOD product - 2nd one I've purchased and would recommend this product
Another good experience. Product was delivered on time and in good condition.
The etrailer team has always offered excellent customer service and Nicholas was top tier as well.The merchandise prices aren't bad either and I'd definitely recommend:)
Great fenders for the price especially coming with the backs all ready installed.
I was looking for trailer fenders that would add to my canoe trailer build. I would highly recommend these fenders.
you sent us 2 different style fenders,one smooth and 1 ribbed.we used anyway as it was just being used on an air compressor.
Easy fit in my opinion they are a good product. We're just what I was looking for, and I'm proud that I bought them.
Gwendolyn Y.
7/2/2025
That's a great color blue for your trailer, Larry. Is there any reason why you picked that color?
Gwendolyn Y.
7/8/2025
The fenders were a perfect addition for my UTV trailer. Great quality and easy to mount. The ribs look great too.
I bought two of these fenders to replace the fenders on my boat trailer that had rotted away. These fenders fit better than the original fenders that came with the boat. I bolted these fenders on after priming and painting them to match the trailer frame. I shopped around and etrailer had a great price compared to other vendors who were selling the exact same item. I have bought many items over the years from etrailer and have always been pleased with their products and quality.
I normally don't have the time to respond. But I appreciate the "a little about me" from Dayton H. It feels personal and I can relate. Being the purchasing agent, I am essentially a parts and supplies guy. Keep the family-owned vibe. So often I feel we lose that in such a fast-paced environment. About the product, we got exactly what we were looking for at a price we felt comfortable with.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
7/16/2023
We made several local trips less than 100 miles each and things were just fine. We then went to the finger lakes in NY State and hit some very bumpy roads on Route 81 in PA & NY. The fenders vibrated so much that the spot welds completely dislodged the fenders from the trailer and were only held in place by the wires for the lights. I stopped by a local hardware store, bought some channel and a hack saw and bolted on vertical and horizonal braces to both fenders. This made the rigidity needed and repainted the fenders. I have logged another 10,000 miles with no problems. You should recommend enforcement vertically and horizontally.