What Does the Purple Wire of the Coach Step Control Module Control

Question

Question:

What exactly is the purple wire for on the control module? Please explain a good example for the use of the purple wire please. My goal is to have a light under the steps when camping on step switch is off. Thank you

asked by: Jeff T

0

Expert Reply:

The purple wire of the Coach Step Module part # LC301702 that you referenced is for the step light switch. It is designed to send power to the step light switch so that the light comes on.

expert reply by: Jameson C

0

Answer 1

If you check out the diagram I attached you will see how the steps should get wired up. What I would first do is verify that you have voltage in all of the right places on your steps to determine if the module needs to be replaced with the #LC301702.…

view full answer...

Answer 2

We don't carry the SCS/Frigette brand of steps so it's a little hard for me to troubleshoot the problem you are experiencing, but it sounds like the gears of the steps are jamming up which is preventing the steps from moving more than just a…

view full answer...

Answer 3

For your power step on your 2008 Holiday Rambler Endeavor, you will need the Replacement Control Module for Lippert Electric Coach Step #LC301702 based on my research. Your description sounds like a coach step and the attached photo is of a step like…

view full answer...

Answer 4

The Replacement Control Module for Lippert Electric Coach Step #LC301702 has the purple wire that connects to the door light switch. The other end of the switch #LC301694 connects to the Replacement Wiring Harness for Lippert Electric Coach Step…

view full answer...

Answer 5

The Replacement Control Module for Lippert Electric Coach Step #LC301702 is the correct fit for your Lippert Coach step. The long green wire with the ring terminal is your ground and will be attached bare metal to metal on our coach frame. The short…

view full answer...

Answer 6

When installing the Replacement Control Module for Lippert Electric Coach Step, #LC301702 the black wire gets connected for the step light. The four pin connector is for the motor wiring harness and two pin connector is for the motor. The black wire…

view full answer...

Answer 7

The purple wire on Kwikee step modules does not need to be connected for it to function as this is an optional porch light switch circuit. Yours not being connected is most likely not the issue. See attached wiring diagram. In this diagram you'll…

view full answer...

Answer 8

The Lippert Electric Coach Step Control Module #LC301702 is the correct part for both Lippert and Stromberg Carlson brands of electric RV steps. The black wire on this part connects to the step light, and the purple wire connects to the step…

view full answer...

Answer 9

The correct replacement for your old Lippert 163033 Step is the Kwikee Electric RV Step Complete Assembly #LC3691461. This kit is the complete assembly so it'll have everything you need to replace your old worn out one. I've attached a video…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

What Does the Purple Wire of the Coach Step Control Module Control

Product Page this Question was Asked From

Continue Researching