Fulton Magnum 1,200 lb Swivel Jack Replacement

Updated 11/13/2017 | Published 11/11/2017

Products Featured in This Question

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K

(1736)

$102.40

Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs

(145)

$137.77

Question:

Looking to replace a 2003 vintage Fulton magnum 1200 lb swivel jack on a Dorsey trailer. The one on now is directly bolted into the rail, not clamped around it. The bolt pattern/spacing is 5 1/2 inch horizontal and 3 inch vertical. Does the FTJ12000101 have this spacing? Other models? Thanks.

asked by: Doug E

Helpful Expert Reply:

I spoke with my contact at Fulton and if your current jack pivots on a 1/2" bolt then you can use either part # FXP10 for a 1,200 lb option or part # FXP15 if you wanted a 1,500 lb option.

These come with a bolt on bracket that can fit a 3" x 5" trailer frame that you can either choose to use for mounting in place of your current mounting option or you can disregard the bolt on bracket and they will fit directly to your current bracket.

Demonstration videos have been linked for you to reference.

expert reply by: Jon G