Recommended Replacement Jack for Shelby Trailer Jack

Updated 03/14/2018 | Published 03/12/2018

Products Featured in This Question

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs

(145)

$121.45

Jack Mounting Bracket for Fulton Marine Jack - Weld-On

(59)

$19.91

Question:

I have a broken Shelby trailer jack. The model number has worn off but I can make out that it ends with “A 24Z” and I believe it’s a 1500lbs jack. I’m looking for a replacement that will work with the welded bracket and can be installed by removing the through bolt.

asked by: Doug C

Expert Reply:

The Fulton Bolt-Thru Swivel Marine Jack # FXP15W is a bolt through replacement option for you. This is designed to use a welded plate like the Jack Mounting Bracket for Fulton Marine Jack # P9012-00. It appears like you have a bolt that goes into a threaded plate, so the reverse of this assembly. If that is the case, I believe this jack will still work, but you will need to put the bolt through the jack first and then thread the bolt once behind the jack into the welded plate.

expert reply by: Jason S