In-Depth Review of the Fulton Boat Trailer Jack w/ Wheel Video

According to our research the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit as a replacement for your Shelby 5756 boat trailer jack. It will allow you to keep the same bracket that is currently welded-on. You basically need to…

What we have heard is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jack 5784.

With a weld-on Shelby jack, you will need to replace it since Shelby jacks are no longer in production. I recommend the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On, part #FTJ120W0301. This will use the existing weld-on bracket and collar…

We did have a customer come back and say that the Fulton jack part #FTJ120W0301 will attach just fine to the pipe mount on the trailer frame where a Shelby jack just like yours was installed.

For a tire to replace the 145/R12 size tires currently on your trailer, I recommend the Kenda Karrier S-Trail Radial Trailer Tire #AM10130. This is a great radial trailer tire that has a 1,220 pound maximum load at 65 psi. Note that this is a Load…

Based on my research, the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will be a perfect replacement for your Shelby 5756A trailer jack. This jack will allow you to use the existing snap ring jack mount on your trailer for installation.…

Yes, since your current Fulton jack is a bolt-thru style, you can use the Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR with your current welded on bracket. You just need to remove the jack from the included bolt-on bracket and mount it to your…

What we have heard from our customers is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jacks like the 5756a that you have. This would be a really solid choice to go with.

The ideal placement of a tongue jack on an a-frame trailer is indeed as close to the trailer coupler as possible. That said, there are others with the very same issue you have and they use a swivel mount jack on the a-frame portion just a bit further…

If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual…

What we have heard is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jack 5784 which is what it looks like you have something similar to.

Although we don't offer a direct replacement, as Shelby is no longer in business, the Fulton #FTJ120W0301 would be compatible with the snap ring base your Shelby 5776 used. The jack has a 1200 lb capacity and offers 10 inches of lift. I'll…