Does Trailer Axle Need to be Moved Forward?
Published 11/08/2017 >
Question:
I used a caravan chassis to make a trailer I cut out 1.5m from rear the total length of trailer from the tow hitch to the rear end is 4.6 m now the front of trailer is very heavy to lift up do I need to move my axle forward as per 60/40 ratio and if I do move it do I measure from tow hitch which is 1 meter or from the trailer box which is 3.6m
asked by: Ricky
Expert Reply:
The correct axle position should be determined by the formula I have added for you. The 60/40 ratio you mentioned is normally just a starting point and you would want to use the formula to figure out the optimal place for your axle. As for measurement, when using this formula you will want to measure from the end of your trailer tongue.
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Q&A: Which Hub fits an Outer Bearing L44649 and Outer Race L44610
- Q&A: How to Choose the Correct Tie-Down for a Boat and Trailer
- Q&A: Install Video for Draw Tite Trailer Hitch that Fits 2010 Hyundai Accent
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer tires and wheels
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Search Results: trailer lights
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Base Plate for Tow Bar


