See what our Experts say about this Timbren Vehicle Suspension

• Complete Snow Plow With Front Hitch And Suspension Upgrade For 2018 Ford F150 4WD Plowtruck
  Caleb, you’ll be happiest with the HomePlow Hydraulic # ME53FR or the commercial-grade WingMan # ME35FR. Both give you full in-cab control for raise, lower, and angle. The WingMan just adds a thicker 26" blade and dual hydraulic cylinders for heavier duty setup and more control. If you plan to use it quite a bit, the commercial one is worth the extra money. Either one fits right into a 2" receiver (if you don't have one yet, the Curt # C31083 would work fine). On a half ton truck, it's...
  view full answer...
• How Long to Install Timbren Front Axle Kit TFF150G
  Hey Rene, the install of the Timbren front axle kit part # TFF150G is pretty straightforward. If you had the tools on hand and ready to go I'd think you'd have no problem getting it done in under an hour. But everyone is different and work at different paces.
  view full answer...
• Using the Timbren Suspension Enhancement System On a Lifted 2015 Ford F-150
  We have both front and rear Timbren Suspension Enhancement Systems for your 2015 Ford F-150. For the front of your truck you will want to use part # TFF150G and for the rear you will want to use part # TFRTT1504E. Timbren recommends a distance of 1" from the bottom of the bump stop to the top of the contact point. You can achieve this distance on trucks that are lifted using increments of the Timbren 1/2" Spacer part # TA25722-90P00 and the Timbren 1" Spacer part # A25723-90AH00 until the...
  view full answer...
• Which Front Suspension Enhancement Will Work For 2021 Ford F150 With Leveling Kit?
  Without knowing what particular front leveling kit you have on your 2021 Ford F-150, I recommend the Timbren Front Suspension Enhancement System # TFF150G. However, even though this system fits with most standard leveling kits, we cannot confirm for sure if this set will work with your specific kit. With that being said, you will need spacers like the Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing # A25723-90AH00 in order to bridge the gap (assuming there is no interference...
  view full answer...
  
• Will the Front Timbrens for a 2020 Ford F-150 Work With Leveling Kit
  The Timbren Front Suspension Enhancement System part # TFF150G which is a fit for a 2020 Ford F-150 should not interfere with a leveling kit but they don't all install the same so it'll be up to you to determine combability. That said, you will need spacer(s) to bridge the gap like part # A25723-90AH00 assuming there is no interference.
  view full answer...
• Leveling Out a 2017 Ford F-150 Under a Heavy Load with Suspension Enhancements
  Suspension enhancements are a great way to level out your 2017 Ford F-150 (or bring it back to the unloaded height). Of course, with a heavy load in the back, these enhancements won't put them at exactly the truck's unloaded height, but it will come close. For the rear, I recommend the SumoSprings Helper Springs, part # SSR-117-47. These jounce-style springs require less maintenance than air springs like the Timbrens, making them much more convenient. They're also much easier to install....
  view full answer...
• Is There a Replacement Hardware Kit For the Timbren Front Suspension # TFF150G on 2018 Ford F-150?
  It does not appear that Timbren offers any replacement parts for their Front Suspension Enhancement System # TFF150G. You will either have to replace the entire system or have new threaded studs welded onto the specialty mounting hardware. The stud is threaded M10x1.5 and is of grade 8 strength. A local welder or auto repair facility should be able to source the parts and weld them on.
  view full answer...

Do you have a question about this Vehicle Suspension?