How to Pick Out Trailer Hubs for Older Dilly Trailer
Updated 10/09/2017 | Published 10/08/2017
Question:
Hello, I get all my trailer parts from you all.... I have 1976 Dilly Trailer I am rebuilding. I need to get the correct hub kits for it. Serial # 366234 and Model DLX-250. Says on sticker that it was manufactured by Green and Green MFG. CO. in Lancaster Texas. The other Sticker says: Dilly Trailers, Nelson- DYkes Co Dallas Texas. I have pics of the stickers if that would help get the right parts. Thanks
asked by: John B
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. I wish there was a way to find out what you need based solely on trailer info that you gave, but that's not something that's readily available. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 4L x 1W Inch
- Amber
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 1/2" Shaft - Qty 1
- Shop: CE Smith Bunk-Style Guide-On Kit for Boat Trailers - 90 Degree Posts - Pre-Galvanized
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 1-1/8" Shaft
- Shop: Yates Endcap for Boat Trailer Rollers - Heavy-Duty Rubber - 1/2" Shaft - Qty 1
- Shop: Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 5/8" Shaft
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 1" Shaft
- Q&A: How to Remove Bearing Buddy Bearing Protector From Hub
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
- Article: Trailer Lighting Requirements
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Measure for Trailer Hitch Drop
- Shop: Gooseneck Hitch
- Search Results: trailer lights
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
on Trailer Lights
