Curt Trailer Hitch Recommendation for 1980 Short Bed Chevy Truck with Standard Bumper

Question

Question:

bumper the truck came out with what trail hitch would fit it

asked by: Randy

0

Expert Reply:

For your 1980 Chevy truck with a short bed and a standard bumper the Curt hitch part # C14082 is a confirmed fit and would work well. Curt has confirmed the fit for us.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The trailer hitch options for a 1984 Chevrolet C/K Series Pickup all install in the same manor using holes on the underside of the frame. If there are any brackets present they would need to be removed and are most likely not factory therefore the…

view full answer...

Answer 2

Yes, you'll be able to re-install the rear spare tire with the Curt Trailer Hitch Receiver part #C14082 in place on a 1979 Chevrolet C/K Series Pickup. I have attached for you below a photo of a truck with this same hitch and the spare tire…

view full answer...

Answer 3

Actually several of your pictures did make it through! What you have there is the standard/step bumper on your 1979 Chevy C-10. Deep drop bumpers, also called cowboy bumpers, drop way down. If your truck has an 8 foot bed you can use Curt trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Curt Trailer Hitch Recommendation for 1980 Short Bed Chevy Truck with Standard Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching