Replacement Hub and Drum Assembly for 1993 and 2001 EZ Loader Boat Trailer

Published 09/29/2017

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2

(627)

$220.45

Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2

(103)

$111.71

Replacement Trailer Hub Bearing - L44649

(2136)

$22.22

Question:

I would like to purchase a complete boat trailer hub assembly 5 Bolt style that comes complete with bearings seals, etc. The two trailers I would like hubs for are: Year 1993 Model 1417R1250 VIN 1ZE1RCV18PA027977 AND THE SECOND TRAILER IS: YEAR 2001 MODEL 1417R1250G VIN 1ZEADAKD51A123154 CAN YOU LET ME KNOW WHAT EZLOADER PART NUMBER THAT I NEED REGARDS

asked by: Brian R

Expert Reply:

I have great news!

I spoke with my contact at EZ Loader and was able to determine that both of your boat trailers will actually use the same hub assemblies and bearings. Both your 1993 and 2001 trailer have a 1,500 pound axle and are equipped with spindles that accept the # L44649 inner and outer bearing. The existing hubs should have a 5 on 4-1/2 inch bolt pattern.

For a replacement hub and drum assembly, I recommend the Dexter Trailer Hub and Drum Assembly # 8-257-5UC3-EZ. This assembly uses the # L44649 inner and outer bearing and features a 5 on 4-1/2 inch bolt pattern. The bearings, races and grease seal are all included. For an idler hub assembly you can use # 8-258-5UC1-EZ.

I have attached a couple of video demonstrations on this hub assembly that you can also check out.