Replacement Rear Support for Yakima SkyBox 18

Question

Question:

Hi there, Im looking for a rear lid support for a Yakima Skybox 18. I see you have the front support in stock, but cant find the part number for the rear support.

asked by: Thomas

0

Expert Reply:

You will need part # 8880683 for the rear support and part # 8880684 for the front support.

expert reply by: Jacob W

0

Answer 1

The Yakima Skybox 21 part #Y07337 made from 2014 to present has a much more aerodynamic shaped lid than the Yakima Skybox 21 part Y07184 made from 2009 to 2014 had. I have attached a photo of each so you can see the difference. If you have the 09-14…

view full answer...

Answer 2

You can buy the front and rear lid supports for your Yakima SkyBox 18 #Y07336 right here! For the front lid support you need Replacement Lid Support #8880684 while for the rear lid support you need Replacement Lid Support #8880683.

view full answer...

Answer 3

The correct rear hinge for your Yakima SkyBox 18, like part #Y07336, is the Replacement Lid Support #8880683. I spoke with my contact at Yakima who confirmed this as well.

view full answer...

Answer 4

The Replacement Rear Lid Support for Yakima SkyBox 12 and SkyBox 16 Rooftop Cargo Boxes 2009 and Newer 8870088 was originally attached with the rivets you have attached a picture of. The new support comes with screws that are used instead. You can…

view full answer...

Answer 5

The correct updated front and rear hinge/lid support for a Yakima Skybox 18 is the Replacement Lid Support for Yakima Cargo Boxes part #8880683 for the front and then the Replacement Lid Support for Yakima Cargo Boxes part #8880684 for the rear. I…

view full answer...

Answer 6

I confirmed with my contact at Yakima that the length of your box fits the dimensions of the older Yakima SkyBox 18 #Y07336 or the older Yakima SkyBox 21 #Y07337. Both the SkyBox 18 and the SkyBox 21 use the same replacement rear and front supports.…

view full answer...

Answer 7

So even though your Yakima SkyBox 18 #Y07336 or SkyBox21 #Y07337 has the diamond shaped hinges currently, those are an older model hinge that is no longer used by Yakima; you also won't be able to use the Replacement Front Lid Support 8870090…

view full answer...

Answer 8

The Yakima SkyBox 18 Rooftop Cargo Box - 18 cu ft - Black Carbonite #Y07336 rear support is #8880683. The front support is 8870089 as you stated but it has been discontinued. I've linked the page to other Yakima roof box parts in case there is…

view full answer...

Answer 9

I was able to get confirmation from Yakima that the Replacement Lid Support for Yakima Cargo Boxes #8880683 is the correct lid support arm for your 2011 model Yakima SkyBox 16.

view full answer...

Answer 10

I spoke with Yakima, and they said that the Replacement Lid Support for Yakima Cargo Boxes #8880684 and the Replacement Lid Support for Yakima Cargo Boxes #8880683 are the essentially the same thing minus the spring color, oddly enough. But, even…

view full answer...

Answer 11

Yakima has rolled over their part numbers since that answer and replaced it with two hinges that work with all of their cargo boxes. For your Skybox 16, you'll just need two of part #8880683.

view full answer...

Answer 12

It sounds like you are needing the lid supports for your Yakima SkyBox 16, part #Y07335. We have that here. It's part #8880683. These may look a bit different than what you are used to, but that is because Yakima has updated their supports. This…

view full answer...

Replacement Rear Support for Yakima SkyBox 18

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching