Front and Rear Lid Supports for Yakima SkyBox 18

Question

Question:

Hi where can I buy front and rear lid supports for my skybox 18, I dont know what year it was made in. I only have the part number off the lid supports

asked by: Nik

0

Expert Reply:

You can buy the front and rear lid supports for your Yakima SkyBox 18 # Y07336 right here!

For the front lid support you need Replacement Lid Support # 8880684 while for the rear lid support you need Replacement Lid Support # 8880683.

expert reply by: Kyle S

0

Answer 1

The Yakima Skybox 21 part #Y07337 made from 2014 to present has a much more aerodynamic shaped lid than the Yakima Skybox 21 part Y07184 made from 2009 to 2014 had. I have attached a photo of each so you can see the difference. If you have the 09-14…

view full answer...

Answer 2

The Yakima SkyBox 18 Rooftop Cargo Box - 18 cu ft - Black Carbonite #Y07336 rear support is #8880683. The front support is 8870089 as you stated but it has been discontinued. I've linked the page to other Yakima roof box parts in case there is…

view full answer...

Answer 3

I confirmed with my contact at Yakima that the length of your box fits the dimensions of the older Yakima SkyBox 18 #Y07336 or the older Yakima SkyBox 21 #Y07337. Both the SkyBox 18 and the SkyBox 21 use the same replacement rear and front supports.…

view full answer...

Answer 4

So even though your Yakima SkyBox 18 #Y07336 or SkyBox21 #Y07337 has the diamond shaped hinges currently, those are an older model hinge that is no longer used by Yakima; you also won't be able to use the Replacement Front Lid Support 8870090…

view full answer...

Answer 5

You will need part #8880683 for the rear support and part #8880684 for the front support.

view full answer...

Answer 6

The correct updated front and rear hinge/lid support for a Yakima Skybox 18 is the Replacement Lid Support for Yakima Cargo Boxes part #8880683 for the front and then the Replacement Lid Support for Yakima Cargo Boxes part #8880684 for the rear. I…

view full answer...

Answer 7

The correct rear hinge for your Yakima SkyBox 18, like part #Y07336, is the Replacement Lid Support #8880683. I spoke with my contact at Yakima who confirmed this as well.

view full answer...

Answer 8

Hello John, thanks for reaching out. We do have the replacement lift hinges for the Yakima SkyBox 16. For that you can use the Replacement Lid Support for Yakima Cargo Boxes #8880684. That said, the pieces riveted to the top lid are not replaceable,…

view full answer...

Answer 9

The Replacement Front Lid Support for Yakima SkyBox 12 and SkyBox 16 Rooftop Cargo Boxes 2009 and Newer #8870090 is universal for the front and rear. I've attached a couple photos of the installation instructions to assist.

view full answer...

Answer 10

According to Yakima, to install the Replacement Lid Support for Yakima Cargo Boxes #8880684 you'll need to use a mallet #PT24FR because it'd be too difficult to do by hand.

view full answer...

Answer 11

Thanks for the picture of your Yakima box's lid support. Based on that I can tell you that the part #8880683 is the correct replacement you are looking for.

view full answer...

Answer 12

The Replacement Rear Lid Support for Yakima SkyBox 12 and SkyBox 16 Rooftop Cargo Boxes 2009 and Newer 8870088 was originally attached with the rivets you have attached a picture of. The new support comes with screws that are used instead. You can…

view full answer...

Front and Rear Lid Supports for Yakima SkyBox 18

Products Featured in This Question

Continue Researching