Will etrailer Trailer Hitch e98855 Still Allow Hands-Free Liftgate to Work on 2018 Honda Odyssey

Updated 06/03/2024 | Published 07/07/2017

Products Featured in This Question

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(452)

$189.99

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(141)

$165.19

Question:

what do you need to do with the sensor if you install hitch if you want to have sensor still work for hatch opening?

asked by: Tony

Expert Reply:

The etrailer Round Tube Receiver Hitch # e988551 referenced in your question is confirmed to fit your 2018 Honda Odyssey. The hands-free Liftgate sensor on the vehicle will still operate after installation. You will just simply need to move your foot to either side of the hitch receiver to activate the sensor.

This Class III hitch will provide a 2 inch receiver opening and a gross towing weight capacity of 3,500 pounds, although I also recommend checking the capacity of your vehicle as listed in the owner's manual. I have attached the installation details for you to check out.

If you plan on doing any towing, you can use the Vehicle Wiring Harness # C59496 to install a 4-way connector. This is a hardwire kit that includes a circuit tester to help you find the correct wires behind the Odyssey's tail lights.

I have also attached an article that explains how to determine the correct size ball mount you will need to tow your trailer level along with a link that will take you to our available selection.

expert reply by: Chris R

Lonnie

5/31/2024

On a 2024 Honda Odyssey will the foot lift gate opener still work when the hitch is installed

Chris R.

6/3/2024

@Lonnie Yep! You might need to find a new spot for the sensors to pick up your foot (usually right near the bottom of the hitch receiver), but it'll still work just fine.