What Is The Part Number Of The Timbren A155-65 Springs

Question

Question:

Do you have Timbren part # A155-65?

asked by: Glenn S

0

Expert Reply:

Yes, A155-65 is the model number that corresponds to the Timbren Front Suspension Enhancement System part # TDF15002C. They have a 600 lb. capacity and are designed to replace the factory axle stops. This part is listed as a fit for a 2002-2005 Dodge Ram 1500.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Josh! Yes, the Pacbrake Alpha XD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers #PB89RV will fit your Sprinter. This is specifically designed for models with dual rear wheels. The only reason these wouldn't work is if you have the ride…

view full answer...

Answer 5

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 6

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 7

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Answer 8

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

view full answer...

Answer 9

Hi Tim, That's a great question! While Timbrens and SumoSprings are both suspension enhancements, they perform differently depending on how much weight you're towing/hauling and how often you're planning on towing/hauling. The only…

view full answer...

Answer 10

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

What Is The Part Number Of The Timbren A155-65 Springs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching